User Guide Smart Wire-Free Security Camera System ©2023 TP-Link 1910013278 REV1.0.
Contents About This Guide············································································ 1 Introduction······················································································· 2 Appearance-Camera···································································· 3 Appearance-Hub ········································································· 4 Charge the Battery········································································· 7 Set Up Your Camera··············
About This Guide This guide provides a brief introduction to the Smart Wire-Free Security Camera System and the Tapo app, as well as regulatory information. Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo Camera experience.
Introduction Install anywhere with long battery life. Tapo Wire-Free Security Camera System is designed to be used outdoors. Its rechargeable and removable battery with a low-power protocol extends your usage. No wires means you can place the camera wherever you like. • 1080p Full HD Live View – Check 24hrs clear live view through the Tapo app. • 180 Day Long Battery Life* – The rechargeable and removable battery with a low-power protocol extends your usage.
Appearance-Camera Front Back 6 SYNC / RESET 1 2 3 4 5 1 Lens 2 Light Sensor 3 Motion Sensor 4 Status LED Indicate the status of your camera.
Appearance-Hub 1 SYNC Press to pair with the camera, or silence the hub when it rings. 4 2 RESET Press and hold for at least 5 seconds until the hub LED quickly blinks red to reset the hub. 3 microSD Card Slot m D S ro ic 1 2 3 Insert a microSD card to record camera videos locally. Initialize the microSD card within the Tapo app first. microSD card not included. ▲ 4 Status LED Indicate the status of your hub.
Hub Status LED Solid red Blinking red and green Solid amber Solid green Blinking green slowly Blinking red quickly Blinking green quickly Starting up Ready for setup Connected to router Connected to the cloud Pairing Hub resetting Hub updating 5
Camera Status LED Solid Red Blinking red and green Blinking green slowly Starting up Ready for pairing Pairing Solid amber Connected to the hub Solid green Connected to the cloud Blinking red quickly Camera resetting Blinking green quickly Camera updating Blinking red once a minute Blinking red slowly Low battery Offline 6
Charge the Battery Method 1: Connect the battery to a power source. 5V USB Charger Charging: Solid amber Fully charged: Solid green Method 2: Insert the battery into the camera, and then connect the camera to a power source.
Set Up Your Camera Follow the steps below to get started with your new hub and camera. Step 1. Download Tapo App Get the Tapo app from the App Store or Google Play, or by scanning the QR code below. Step 2. Log In Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. Step 3. Add Your Hub First Tap the button in the app and select your model. Follow app instructions to set up your hub.
Step 4. Add Your Camera Tap the button in the app and select your model. Follow app instructions to set up your camera.
Install a microSD Card If you want the camera to record videos locally, insert a microSD card to your hub. Initialize the microSD card within the Tapo app. You can go to Camera Settings > microSD Card in the Tapo app to check the card status or format your card.
Installation Options When you finish adding your camera in the Tapo app, you can place your camera on a flat surface, or mount it on a wall or ceiling with the provided mounting template and screws. Option 1. Set on a Table Install Option 2.
Mount Your Camera When you finish adding your camera in the Tapo app, you can place your camera on a flat surface, or mount it on a wall or ceiling with the provided mounting template and screws. Step 1. Drill Holes Stick the mounting template to the desired mounting place. Drill 3 screw holes according to the template. Step 2. Install the Bracket Insert three anchors into the holes and use the screws to affix the bracket over the anchors. Step 3.
Authentication FCC compliance information statement Product Name: Smart Wire-Free Security Camera System Model Number: Tapo C400S2 Component Name Model USB ADAPTER A8-501000 I.T.E. Power Supply Rechargeable Lithium-ion Battery T090085-2B1 Tapo A100-INT Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 926181 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.
• Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Address: 10 Mauchly, Irvine, CA 926181 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2412MHz—2472MHz (20dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
2. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2.
NCC Notice 注意！ 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前述合法通信，指依電信管理法規定作業之無線電通信。 低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 BSMI Notice 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 • 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 • 電源供應器应使用在环境温度低於或等於40℃的室內。 限用物質含有情況標示聲明書 設備名稱：Smart Wire-Free Sec
外殼 電源供應器 其他及其 配件 ○ − − ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值 ○ Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考 3.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us. • This product can be powered only by power supplies that comply with Power Source Class 2 (PS2) or Limited Power Source(LPS) of IEC 62368-1. • This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices.
Explanation of the symbols on the product label Symbol Alternating current Explanation DC voltage Caution Operator’s manual Class II equipment Polarity of output terminals Energy efficiency Marking Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
