Installation Instructions

JetStream Gigabit L2 Managed Switch
06
Introduction
Port Feature
Model 10/100/1000Mbps RJ45 Port SFP Port Console Port
T26 00G -18TS 16 2 2
T2600G-28TS 24 4 2
T2600G-52TS 48 4 2
T2600G-28MPS 24 4 2
■
Rear Panel
The rear panel of the switch is shown as the following figure
.
Figure 1-5 Rear Panel
100-240V~50/60Hz 0.5A
Power
Socket
Grounding
Terminal
Kensington
Security slot
Kensington Security Slot
Secure the lock (not provided) into the security slot to prevent the device from being stolen.
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground the switch
through the PE (Protecting Earth) cable of AC cord or with Ground Cable. For detailed information,
please refer to Chapter 3 Lightning Protection.
Power Socket
Connect the female connector of the power cord here, and the male connector to the AC power
outlet. Please make sure the voltage of the power supply meets the requirement of the input
voltage (100-240V~ 50/60Hz).
Caution:
Please use the provided power cord.