Operation Manual
Table Of Contents
- Package Contents
- Chapter 1 About This Guide
- Chapter 2 Introduction
- Chapter 3 Login to the Switch
- Chapter 4 System
- Chapter 5 Switching
- Chapter 6 VLAN
- Chapter 7 Spanning Tree
- Chapter 8 Ethernet OAM
- Chapter 9 DHCP
- Chapter 10 Multicast
- Chapter 11 QoS
- Chapter 12 ACL
- Chapter 13 Network Security
- Chapter 14 SNMP
- Chapter 15 LLDP
- Chapter 16 Cluster
- Chapter 17 Maintenance
- Chapter 18 System Maintenance via FTP
- Appendix A: Glossary

64
Figure 5-19 Address Table
The following entries are displayed on this screen:
Search Option
MAC Address:
Enter the MAC address of your desired entry.
VLAN ID:
Enter the VLAN ID of your desired entry.
Port:
Select the corresponding port number of your desired entry.
Type
: Select the type of your desired entry.
All:
This option allows the address table to display all the
address entries.
Static: This option
allows the address table to display the
static address entries only.
Dynamic:
This option allows the address table to display the
dynamic address entries only.
Filtering:
This option allows the address table to display the
filtering address entries only.
Address Table
MAC Address:
Displays the MAC address learned by the switch.
VLAN ID:
Displays the corresponding VLAN ID of the MAC address.
Port:
Displays the corresponding Port number of the MAC address.
Type:
Displays the Type of the MAC address.
Aging Status:
Displays the Aging status of the MAC address.