Operation Manual

59
Choose the menu Switching→LAG→LACP Config to load the following page.
Figure 5-16 LACP Config
The following entries are displayed on this screen:

Global Config
System Priority:
Specify the system priority for the switch. The system pri
ority and
MAC address constitute the system identification (ID). A lower
system priority value indicates a higher system priority. When
exchanging information between systems, the system with higher
priority determines which link aggregation a link belongs
to, and the
system with lower priority adds the proper links to the link
aggregation according to the selection of its partner.

LACP Config
Port Select
: Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select:
Select the desired port for LACP configuration. It is multi-optional.
Port:
Displays the port number.
Admin Key
: Specify an Admin Key for the port. The member ports in a dynamic
aggregation group must have the same Admin Key.
Port Priority:
Specify a Port Priority for the port. This value determines the