Operation Manual

50
Choose the menu Switching→DDM→DDM Config to load the following page.
Figure 5-6 DDM Config
The following entries are displayed on this screen:

Port Config
Select:
Select the desired port for configuration. It is multi-optional.
Port:
Displays the port number.
DDM Status:
Select Enable/Disable the DDM status of the port.
Shutdown:
Specify whether to shut down the port when an exceeding
alarm threshold or warning threshold event is encountered.
 Alarm:
Shut down the port when an exceeding alarm
threshold event is encountered.
 Warning:
Shut down the port when an exceeding
warning threshold event is encountered.
 None:
The port will never be shut down regardless of the
exceeding alarm threshold and warning threshold
events. This is the default option.
LAG:
Displays the LAG number which the port belongs to.
5.2.2 Temperature Threshold
On this page, you can view and configure the DDM Temperature Threshold for specific ports on
the switch.
Choose the menu Switching→DDM→Temperature Threshold to load the following page.
Figure 5-7 Temperature Threshold