Operation Manual

47
Figure 5-4 Port Isolation Config
The following entries are displayed on this screen:

Port Isolation Config
From/To Port:
Select the port number to set its forwardlist.
Forward Portlist:
Select the port(s) to be forwarded to.

Port Isolation List
Port:
Display the port number.
Forward Portlist:
Display the forwardlist.
5.1.5 Loopback Detection
With loopback detection feature enabled, the switch can detect loops using loopback
detection packets. When a loop is detected, the switch will display an alert or further block the
corresponding port according to the port configuration.