Operation Manual

314
Step
Operation
Description
2 Enable the NTDP function
globally and for the port, and
then configure NTDP parameters
Optional. On Cluster→NTDP→NTDP Config page,
enable the NTDP function on the switch.
3 Establish a cluster and configure
the related parameters
Optional. On Cluster→Cluster→
Cluster Config
page, e
stablish a cluster and configure the related
parameters.
4 Manage the device in the cluster Optional. On Cluster→Cluster→
Member Config
page, select the desired member switches and click
the Manage
button to log on to its Web
management page for configuration.
Or
On Cluster→Cluster→Cluster Topology page,
double- click the icon of the switch to view its
detailed information; click the icon, and then click
the Manage
button to log on to its Web
management page for configuration.
 If the switch is a member switch in the cluster, please take the following steps.
Step
Operation
Description
1 Enable the NDP function globally
and for the port, and then
configure NDP parameters
Optional. On Cluster→NDP→NDP Config page,
enable the NDP function on the switch.
2 Enable the NTDP function
globally and for the port, and
then configure NTDP parameters
Optional. On Cluster→NTDP→NTDP Config page,
enable the NTDP function on the switch.
3 Manually collect NTDP
information
Optional. On Cluster→NTDP→Device Table page,
click the Collect Topology
button to manually
collect NTDP information.
Or
On Cluster→Cluster→Cluster Topology page, click
the Collect Topology button to manually collect
NTDP information.
4 View the detailed information of
other switches in the cluster.
Optional. On Cluster→Cluster→
Cluster Topology
page, double-click the icon of the switch to view its
detailed information.
Return to CONTENTS