Operation Manual

312
16.3.3 Member Config
When this switch is the commander switch of the cluster, via the commander switch you can
manually add a candidate switch to the cluster as well as remove the designated member
switch from the cluster. On this page you can configure and manage the member switch.
Choose the menu Cluster→Cluser→Member Config to load the following page.
Figure 16-17 Member Config
The following entries are displayed on this screen:

Create Member
Member MAC:
Enter the MAC address of the candidate switch.

Member Info
Select:
Select the desired entry to manage/delete the corresponding
member switch.
Device Name:
Display the description of the member switch.
Member MAC:
Displays the MAC address of the member switch.
IP Address: Displays the IP address of the membe
r switch used in the
cluster.
Status:
Displays the connection status of the member switch.
Role:
Displays the role the switch plays currently.
Online Time:
Displays the time when the member switch is added to the
cluster.
Hops: Displays the hop count f
rom the member switch to the
commander switch.
Manage: Click the Manage
button after selecting the desired entry to log
on to the Web management page of the corresponding member
switch.
16.3.4 Cluster Topology
On this page you can see the whole cluster topology. Click the node switch to directly log on to
the corresponding Web management page for you to configure and manage this switch.
Double-click the node switch to view its detailed information.