Operation Manual
Table Of Contents
- Package Contents
- Chapter 1 About This Guide
- Chapter 2 Introduction
- Chapter 3 Login to the Switch
- Chapter 4 System
- Chapter 5 Switching
- Chapter 6 VLAN
- Chapter 7 Spanning Tree
- Chapter 8 Ethernet OAM
- Chapter 9 DHCP
- Chapter 10 Multicast
- Chapter 11 QoS
- Chapter 12 ACL
- Chapter 13 Network Security
- Chapter 14 SNMP
- Chapter 15 LLDP
- Chapter 16 Cluster
- Chapter 17 Maintenance
- Chapter 18 System Maintenance via FTP
- Appendix A: Glossary

303
The following entries are displayed on this screen:
Device Table
Device Type:
Displays the device description collected through NTDP.
Device MAC:
Displays the MAC address of this device.
Cluster Name:
Displays the cluster name of this device.
Role: Displays the role this device plays in the cluster.
Commander:
Indicates the device that can configure and
manage all the devices in a cluster.
Member: Indicates the device that is managed in a cluster.
Candidate:
Indicates the device that does not belong to any
cluster though it can be added to a cluster.
Individual:
Indicates the device with cluster feature
disabled.
Hops:
Displays the hop count from this device to the switch.
Neighbor Info: Click the Detail
button to view the complete information of this
device and its neighbors.
Collect Topology: Click the Collect Topology
button to collect NTDP information
of the switch so as to collect the latest network topology.
Click the Detail button to view the complete information of this device and its neighbors.
Figure 16-6 Information of the Current Device