Operation Manual

272
Timeout:
Specify the maximum time for the switch to wait for the
response from the management station before resending a
request.

Notification Table
Select:
Select the desired entry to dele
te the corresponding
management station.
IP Mode:
Select the IP mode.
IP Address:
Displays the IP Address of the management host.
UDP Port:
Displays the UDP port used to send notifications.
User:
Displays the User name of the management station.
Security Model:
Displays the Security Model of the management station.
Security Level:
Displays the Security Level for the SNMP v3 User.
Type:
Displays the type of the notifications.
Timeout:
Displays the maximum time for the switch to wait for the
response
from the management station before resending a
request.
Retry:
Displays the amount of times the switch resends an inform
request.
Operation:
Click the Edit
button to modify the corresponding entry and
click the Modify button to apply.
14.2.2 Traps Config
The switch supports different kinds of SNMP traps. On this page, you can select the traps that
you are concerned about. Then the switch will only report the selected events to the network
management station, and ignore others.