Operation Manual

15
4.1.3 System Time
System Time is the time displayed while the switch is running. On this page you can configure the
system time and the settings here will be used for other time-based functions like ACL.
You can manually set the system time, get UTC automatically if it has connected to an NTP
server or synchronize with PC’s clock as the system time.
Choose the menu System→System Info→System Time to load the following page.
Figure 4-5 System Time
The following entries are displayed on this screen:

Time Info
Current System Date:
Displays the current date and time of the switch.
Current Time Source:
Displays the current time source of the switch.

Time Config
Manual:
When this option is selected, you can set the date and time
manually.
Get
Time from NTP
Server:
When this option is selected, you can configure the time zone
and the
IP Address for the NTP Server. The switch will get
UTC automatically if it has connected to an NTP Server.
 Time Zone: Select your local time.
 Primary/Secondary NTP Server:
Enter the IP Address for
the NTP Server.
 Update Rate: Specify the rate fetching time
from NTP
server.
Synchronize with
PC’S Clock:
When this option is selected, the administrator PC’s
clock is
utilized.