Operation Manual

220
Figure 13-1 Binding Table
The following entries are displayed on this screen:

Search Option
Source:
Select a Source from the pull-down list and click the
Search
button to view your desired entry in the Binding Table.
• All: All the bound entries will be displayed.
• Manual:
Only the manually added entries will be
displayed.
• Scanning:
Only the entries formed via ARP Scanning will
be displayed.
• Snooping: Only th
e entries formed via DHCP Snooping
will be displayed.

Binding Table
Host Name
/IP Address
/
MAC Address Select:
Click the Select button to quick-
select the corresponding
entry based on the Host Name/IP Address/MAC Address
you
entered.
Select:
Select the desired entry to modify the Host Name
/MAC
Address/VLAN ID/Port /Protect Type. It is multi-optional.
Host Name:
Allows you to view and modify the Host Name.
IP Address:
Displays the IP Address of the Host.
MAC Address:
Allows you to view and modify the MAC Address of the Host.
VLAN ID:
Allows you to view and modify the VLAN ID.
Port:
Allows you to view and modify
the number of port connected
to the Host.
Protect Type:
Allows you to view and modify the Protect Type of the entry.
Source:
Displays the Source of the entry.
Collision:
Displays the Collision status of the entry.
• Warning:
Indicates that the collision may be caused by
the MSTP function.
• Critical:
Indicates that the entry has a collision with the
other entries.