Operation Manual
Table Of Contents
- Package Contents
- Chapter 1 About This Guide
- Chapter 2 Introduction
- Chapter 3 Login to the Switch
- Chapter 4 System
- Chapter 5 Switching
- Chapter 6 VLAN
- Chapter 7 Spanning Tree
- Chapter 8 Ethernet OAM
- Chapter 9 DHCP
- Chapter 10 Multicast
- Chapter 11 QoS
- Chapter 12 ACL
- Chapter 13 Network Security
- Chapter 14 SNMP
- Chapter 15 LLDP
- Chapter 16 Cluster
- Chapter 17 Maintenance
- Chapter 18 System Maintenance via FTP
- Appendix A: Glossary

203
Operation: Click the Edit button to modify the time-range. Click the
Detail
button to display the complete information of this time–range.
12.1.2 Time-Range Create
On this page you can create time-ranges.
Choose the menu ACL→Time-Range→Time-Range Create to load the following page.
Figure 12-2 Time-Range Create
Note:
To successfully configure time-ranges, please firstly specify time-slices and then time-ranges.
The following entries are displayed on this screen:
Create Time-Range
Name:
Enter the name of the time-range for time identification.
Holiday: Select Holiday you set as a time-range.
The ACL rule based on this
time-
range takes effect only when the system time is within the
holiday.
Absolute: Select Absolute to configure absolute time-range.
The ACL rule
based on this time-
range takes effect only when the system time is
within the absolute time-range.
Week: Select Week to configure week time-range.
The ACL rule based on
this time-
range takes effect only when the system time is within the
week time-range.
Create Time-Slice
Start Time:
Set the start time of the time-slice.