Operation Manual

169
Report Packet (V1):
Displays the number of IGMPv1 report packets the port
received.
Report Packet (V2):
Displays the number of IGMPv2 report packets the port
received.
Report Packet (V3):
Displays the number of IGMPv3 report packets the port
received.
Leave Packet:
Displays the number of leave packets the port received.
Error Packet:
Displays the number of error packets the port received.
10.1.8 Querier Config
In an IPv4 multicast network that runs IGMP, a Layer 3 multicast device works as an IGMP
querier to send IGMP queries and manage the multicast table. But IGMP is not supported by the
devices in Layer 2 network. IGMP Snooping Querier can act as an IGMP Router in Layer 2
network. It can help to create and maintain multicast forwarding table on the switch with the
Query messages it generates.
Choose the menu Multicast→Querier to load the following page.
Figure 10-12
Packet Statistics
The following entries are displayed on this screen:

IGMP Snooping Querier Config
VLAN ID:
Enter the ID of the VLAN that enables IGMP Snooping Querier.
Query Interval:
Enter the time interval of sending a general query frame by IGMP
Snooping Querier.