Operation Manual

133
The following entries are displayed on this screen:

Link Monitoring Config
Link Event: Select one type of the link events to configure. Link events
include Symbol Period Error, Frame Error, Frame Period Error,
and Frame Seconds Error. For more details about link events,
please refer to OAM Link Events.
Port Select: Click the Select button to quick-
select the corresponding port
based on the port number you entered.
Select:
Select the desired port for configuration. It is multi-optional.
Threshold: Specify the threshold for the selected link event.

For Symbol Period Error, it is the number of error symbols in
the period that is required to be exceeded.

For Frame Error, it is the number of error frames in the
period (measured by 100ms) that is required to be
exceeded.

For Frame Period Error, it is the number of error frames in
the period (measured by frames) that is required to be
exceeded.
 For
Frame Seconds Error, it is the number of error frame
seconds in the period that is required to be exceeded.
Window: Specify the detection period.

For Frame Period Error, the period is specified by a number
of received frames.
 For other link events, the pe
riod is specified by a time
interval.
Notify:
Choose whether to notify the selected link event or not.
8.3 RFI
On this page, you can choose whether to notify the link faults like dying gasp and critical event.
Choose the menu Ethernet OAM→RFI→Remote Failure Indication to load the following page.