Operation Manual

103
Step
Operation
Description
Secondary VLAN 3, and click the Add button
4 Configure Port4 Required. On the VLAN→802.1Q VLAN→VLAN Config page, click
the Edit button and then configure the Egress Rule of Port4 as Tag.
 Configure switch C
Step
Operation
Description
1
Create Private
VLANs.
Required. On the VLAN→Private VLAN→PVLAN Config page,
Enter the Primary VLAN 6 and Secondary VLAN 2-3, and then click
the Create button.
2 Add
Promiscuous
port to Private
VLANs
Required. On the VLAN→Private VLAN→Port Config page,
configure the port type of Port8 as Promiscuous
, enter Primary
VLAN 6 and Secondary VLAN 2-3, and click the Add button.
3 Add Host port
to Private
VLANs
Required. On the VLAN→Private VLAN→Port Config page,
configure the port type of Port9 as Host, enter Primary VLAN 6 and
Secondary VLAN 2, and click the Add button. Configure the port
type of Port10 and Port11 as Host
, enter Primary VLAN 6 and
Secondary VLAN 2-3, and click the Add button
4 Configure Port8 Required. On the VLAN→802.1Q VLAN→VLAN Config page, click
the Edit button and then configure the Egress Rule of Port8 as Tag.
Return to CONTENTS