Operation Manual

102
 Switch B is connecting to PC1, PC2 and PC3;
 Switch C is connecting to PC4, PC5 and PC6;
 PCs in different VLANs cannot communicate with each other;;
 For switch A, packets from switch B and switch C have no VLAN tags. Switch A needs not to
consider the VLANs of switch B and switch C;
 Network Diagram
 Configuration Procedure
 Configure switch A
Step
Operation
Description
1 Create VLAN6 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 6, owning Port 1.
 Configure switch B
Step
Operation
Description
1
Create Private
VLANs.
Required. On the VLAN→Private VLAN→PVLAN Config page,
Enter the Primary VLAN 6 and Secondary VLAN 2-3, and then click
the Create button.
2 Add
Promiscuous
port to Private
VLANs
Required. On the VLAN→Private VLAN→Port Config page,
configure the port type of Port3 and Port4 as Promiscuous, enter
Primary VLAN 6 and Secondary VLAN 2-3, and click the Add
button.
3 Add Host port
to Private
VLANs
Required. On the VLAN→Private VLAN→Port Config page,
configure the port type of Port5 as Host, enter Primary VLAN 6 and
Secondary VLAN 2, and click the Add button. Configure the port
type of Port6 and Port7 as Host, enter Primary VLAN 6 and