Operation Manual

100
Choose the menu VLAN→GVRP→GVRP Config to load the following page.
Figure 6-18 GVRP Config
Note:
If the GVRP feature is enabled for a member port of LAG, please ensure all the member ports of
this LAG are set to be in the same status and registration mode.
The following entries are displayed on this screen:

Global Config
GVRP:
Allows you to Enable/Disable the GVRP function.

Port Config
Port Select:
Click the Select button to quick-
select the corresponding entry
based on the port number you entered.
Select:
Select the desired port for configuration. It is multi-optional.
Port:
Displays the port number.
Status:
Enable/Disable the GVRP feature for the port. The port type should
be set to TRUNK before enabling the GVRP feature.
Registration
Mode:
Select the Registration Mode for the port.
•
Normal: In this mode, a port can dynamically