Operation Manual

Configuration Guide 608
Configuring Network Security Configuration Examples
8.2.3 Network Topology
As shown in the following figure, Switch A acts as the authenticator. Port 1/0/1 is
connected to the client, port 1/0/2 is connected to the RADIUS server, and port 1/0/3 is
connected to the Internet.
Figure 8-8 Network Topology
Internet
Switch A
Authenticator
Client Client
Te1/0/1
Te1/0/2Te1/0/3
Client
RADIUS Server
192.168.0.10/24
Auth Port:1812
Demonstrated with T1700X-16TS acting as the authenticator, the following sections
provide configuration procedure in two ways: using the GUI and using the CLI.
8.2.4 Using the GUI
1) Choose the menu Network Security > AAA > Global Config to load the following page.
Enable AAA function globally on the switch.
Figure 8-9 Enable AAA Function
2) Choose the menu Network Security > AAA > RADIUS Config to load the following
page. Configure the parameters of the RADIUS server.