Operation Manual

Configuring Network Security AAA Configuration
Configuration Guide
587
2) Click Add to add the TACACS+ server on the switch.
7.1.3 Configuring Server Groups
The switch has two built-in server groups, one for RADIUS servers and the other for
TACACS+ servers. The servers running the same protocol are automatically added to the
default server group. You can add new server groups as needed.
Choose the menu Network Security > AAA > Server Group to load the following page.
Figure 7-4 Add New Server Group
The two default server groups in the list cannot be edited or deleted. You can follow these
steps to configure a new server group:
1) In the Add New Server Group section, configure the group name and the server type,
and click Add to add the new server group.
Server Group Specify a name for the server group.
Server Type Select the server type for the group. Two options are provided: RADIUS and
TACACS+.
2) Select the newly added group, and click edit in the Operation column.
Figure 7-5 Edit the Group
3) Select the server to be added to the group from the Server IP drop-down list . Then
click Add to add this server to the server group.