Operation Manual

Configuring QoS DiffServ Configuration
Configuration Guide
455
Switch(config)#show qos cos-map
-----+-----+-----+----+-----+-----+-----+----+----
Tag |0 |1 |2 |3 |4 |5 |6 |7
-----+-----+-----+----+-----+-----+-----+----+----
TC |TC1 |TC0 |TC2 |TC3 |TC4 |TC5 |TC6 |TC7
-----+-----+-----+----+-----+-----+-----+----+----
Switch(config)#interface range ten-gigabitEthernet 1/0/1-3
Switch(config-if-range)#qos 0
Switch(config-if-range)#show qos interface ten-gigabitEthernet 1/0/1-3
Port CoS Value LAG
---------- --------------- ------------
Te1/0/1 CoS 0 N/A
Te1/0/2 CoS 0 N/A
Te1/0/3 CoS 0 N/A
Switch(config-if-range)#end
Switch#copy running-config startup-config
2.2.2 Configuring Schedule Mode
Follow these steps to configure the schedule mode to control the forwarding sequence of
different TC queues when congestion occurs.
Step 1 configure
Enter global configuration mode.