Operation Manual

Configuring Logical Interfaces Appendix: Default Parameters
Configuration Guide
409
3
Appendix: Default Parameters
Default settings of interface are listed in the following tables.
Table 3-1 Configuring the IPv4 Parameters of the Interface
Parameter Default Setting
Interface ID VLAN
IP Address Mode None
Admin Status Enable
Recovery mode Auto
Table 3-2 Configuring the IPv6 Parameters of the Interface
Parameter Default Setting
IPv6
Disable
On VLAN interface 1, it is enabled by default.
Config Mode Auto
Enable global address auto
configuration via RA message
Enable
Enable global address auto
configuration via DHCPv6
Server
Disable