Operation Manual

Configuration Guide 355

Configuring Layer 2 Multicast Configuring MLD Snooping

3.2.8 Configuring the Querier

Enabling MLD Querier

Step 1 configure

Enter global configuration mode.

Step 2 ipv6 mld snooping querier vlan

vlan-id

specifies the VLAN to enable MLD Querier.

Step 3 show ipv6 mld snooping querier [vlan

vlan-id

]

Show the MLD querier configuration.

Step 4 end

Return to privileged EXEC mode.

Step 5 copy running-config startup-config

Save the settings in the configuration file.

The following example shows how to enable MLD Snooping and MLD Querier in VLAN 4:

Switch#configure

Switch(config)#ipv6 mld snooping

Switch(config)#ipv6 mld snooping querier vlan 4

Switch(config)#show ipv6 mld snooping querier

VLAN 4:

--------------

Maximum Response Time: 10

Query Interval: 60

General Query Source IP: fe80::2ff:ffff:fe00:1

Switch(config)#end

Switch#copy running-config startup-config

Configuring Query Interval, Max Response Time and General Query Source IP

Step 1 configure

Enter global configuration mode.