Operation Manual

Configuring Layer 2 Multicast Configuring MLD Snooping
Configuration Guide
349
Member Time:0
Static Router Port:Te1/0/2
Dynamic Router Port:None
Forbidden Router Port:None
Switch(config)#end
Switch#copy running-config startup-config
Configuring Forbidden Router Port
Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld snooping vlan-config
vlan-id-list
router-ports-forbidden interface {gigabitEthernet
port-list
| ten-gigabitEthernet
port-list
| port-channel
port-channel-id
}
port-list
and
port-channel-id
are the ports that cannot become router ports in the specified
VLAN.
Step 3 show ipv6 mld snooping vlan
vlan-id
Show the basic MLD snooping configuration in the specified VLAN.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable MLD Snooping in VLAN 2 and forbid port
1/0/4-6 from becoming router ports (port 1/0/4-6 will drop all multicast data from Layer 3
devices):
Switch#config
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping vlan-config 2 router-ports-forbidden interface ten-
gigabitEthernet 1/0/4-6
Switch(config)#show ipv6 mld snooping vlan 2
Vlan Id: 2
Router Time:0
Member Time:0
Static Router Port:None
Dynamic Router Port:None