Operation Manual

Configuring Layer 2 Multicast Configuring MLD Snooping
Configuration Guide
339
Configuring Static Member Port
Follow these steps to configure static member port.
1) Enter the Multicast IP and VLAN ID. Specify the Static Member Port.
Multicast IP Specify the multicast group that the static member is in.
VLAN ID Specify the VLAN that the static member is in.
Forward Port Specify one or more ports to be the static member port in the multicast group.
Without aging, the static member port receives all multicast data sent to this
multicast group.
2) Click Create.
Viewing MLD Static Multicast Groups
You can search MLD static multicast entries by using Multicast IP, VLAN ID or Forward Port
as the Search Option.
Static Multicast IP Table displays details of all MLD static multicast groups.
3.2 Using the CLI
3.2.1 Enabling MLD Snooping Globally
Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld snooping
Enable MLD Snooping Globally.
Step 3 show ipv6 mld snooping
Show the basic MLD snooping configuration.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
3.2.2 Enabling MLD Snooping on the Port
Step 1 configure
Enter global configuration mode.