Operation Manual

Configuration Guide 214
Configuring Private VLAN Configuration Example
3) Add down-link port to the private VLAN and configure the port type
Choose the menu VLAN > Private VLAN > Port Config to load the following page. Add
port 1/0/10 to primary VLAN 6 and secondary VLAN 5, add port 1/0/11 to primary VLAN
6 and secondary VLAN 7, and select Host as their port type.
Figure 3-4 Configuring the Down-link Port
3.5 Using the CLI

Configurations for Switch A
1) Enter global configuration mode
Switch_A>enable
Switch_A#configure
2) Create primary VLAN 6 and secondary VLAN 5, and pair them into a private VLAN
Switch_A(config)#vlan 6
Switch_A(config-vlan)#private-vlan primary
Switch_A(config-vlan)#exit
Switch_A(config)#vlan 5
Switch_A(config-vlan)#private-vlan community