Operation Manual

Configuring 802.1Q VLAN 802.1Q VLAN Configuration
Configuration Guide
155
2) Select the untagged port(s) and the tagged port(s) respectively to add to the created
VLAN based on the network topology.
Untagged port
The selected ports
will forward untagged packets in the target VLAN.
Tagged port The selected ports will forward tagged packets in the target VLAN.
3) Click Apply.
2.2 Using the CLI
2.2.1 Creating a VLAN
Follow these steps to create a VLAN:
Step 1 configure
Enter global configuration mode.
Step 2 vlan
vlan-list
When you enter a new VLAN ID, the switch creates a new VLAN and enters VLAN
configuration mode; when you enter an existing VLAN ID, the switch directly enters VLAN
configuration mode.
vlan-list
: Specify the ID or the ID list of the VLAN(s) for configuration. The valid values are
from 2 to 4094, for example, 2-3,5.
Step 3 name
descript
(Optional) Specify a VLAN description for identification.
descript
: The length of the description should be 1 to 16 characters.
Step 4 show vlan [ id
vlan-list
]
Show the global information of the specified VLAN(s). When no VLAN is specified, this
command shows global information of all 802.1Q VLANs.
vlan-list
: Specify the ID or the ID list of the VLAN(s) to show information. The valid values are
from 1 to 4094.
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create VLAN 2 and name it as RD :
Switch#configure
Switch(config)#vlan 2
Switch(config-vlan)#name RD