Operation Manual

Managing Physical Interfaces Configuration Examples
Configuration Guide
97
Figure 7-4 Source Port Configuration
4) Click Save Config to save the settings.
7.1.4 Using the CLI
Switch#configure
Switch(config)#monitor session 1 destination interface ten-gigabitEthernet 1/0/1
Switch(config)#monitor session 1 source interface ten-gigabitEthernet 1/0/2-5 both
Switch(config)#end
Switch#copy running-config startup-config
Verify the Configuration
Switch#show monitor session 1
Monitor Session: 1
Destination Port: Te1/0/1
Source Ports(Ingress): Te1/0/2-5
Source Ports(Egress): Te1/0/2-5