Installation Instructions

JetStream 12-Port 10GBase-T Smart Switch with 4 10G SFP+ Slots

17Conguration

Chapter 5 Configuration

5.1 Configure the Switch via GUI

1. To access the GUI of the switch, open a web browser and type the default

management address http://192.168.0.1 in the address field of the browser, then

press the Enter key.

Figure 5-1 Web Browser

Note: To log on to the GUI of the switch, the IP address of your PC should be set in

the same subnet addresses of the switch. The IP address is 192.168.0.x ("x" is any

number from 2 to 254), Subnet Mask is 255.255.255.0.

For the detailed instructions as to how to do this, please refer to Appendix B in the

User Guide on the Resource CD.

2. Enter admin for the default User Name and Password, both in lower case letters.

Then click the Login button or press the Enter key.

Figure 5-2 Login