Specifications

Figure 9-11 Storm Control

The following entries are displayed on this screen:

 Storm Control Config

Port Select:

Click the Select button to quick-select the corresponding port

based on the port number you entered.

Select:

Select the desired port for Storm Control configuration. It is

multi-optional.

Port:

Displays the port number of the switch.

Broadcast: Enable/Disable broadcast control feature for the port.

Multicast: Enable/Disable multicast control feature for the port.

UL-Frame: Enable/Disable UL-Frame control feature for the port.

RATE (bps): Select the bandwidth for receiving the specified packet on the

port. The packet traffic exceeding the bandwidth will be

discarded.

LAG: Displays the LAG number which the port belongs to.

Note:

If you enable storm control feature for the ingress rate limit-enabled port, ingress rate limit feature

will be disabled for this port.

Return to CONTENTS