User Guide

ManualsBrandsTP-Link ManualsComputersAX1500 Wireless Dual-Band Range Extender

7106508675 REV1.0.1

Plug the extender into a power outlet next to your router. Wait until

its Power LED turns solid on.

Power On

Quick Installation Guide

Range Extender

RE505X

Need setup videos?

Scan the QR code, or visit

https://www.tp-link.com/download/RE505X.html

Next to

Solid On

Relocate

Set Up the Extender Via the Tether App

1. Plug in the extender about halfway between your router and the Wi-Fi dead

zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns solid blue. If it doesn't,

relocate the extender closer to the router to achieve better signal quality.

Enjoy!

Connect your devices to the extender wirelessly or via an Ethernet cable,

then enjoy the internet. The password of your extended network is the

same as your host router.

Tip: For more intuitive location assistance, access extender settings via the Tether app and go to

Tools > Location Assistant.

Tip: You can also set up the extender in Access Point mode to transform your existing wired

network to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support.

Laptop

Smartphone

Tablet

Smart TV

Game Console

Desktop

2. Launch the Tether app. Tap the button

on the upper-right corner and select

Range Extender.

My Devices

No devices found.

1. Get the up-to-date Tether app from the

Apple App Store or Google Play, or simply

scan the QR code.

Other Setup Methods:

You can also set up the extender via the WPS button or via a web browser. For details, please refer to the user guide at

https://www.tp-link.com/support.

Note: If the LED does not turn solid on, please

refer to FAQ > Q2.

3. Follow app instructions to complete the

setup. The LED should turn solid on,

indicating successful connection to your

router.

Choose your device type

Archer AX11000

Archer C5400X

Range Extender

Router

Router Devices

Halfway

Blue: Suitable location

Red: Too far from router

Solid On

Summary of content (2 pages)

PAGE 1
Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on. Quick Installation Guide Range Extender RE505X Next to Solid On Need setup videos? Scan the QR code, or visit https://www.tp-link.com/download/RE505X.html 2 Set Up the Extender Via the Tether App 1. Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code. 2. Launch the Tether app. Tap the button on the upper-right corner and select Range Extender. 3.
PAGE 2
Access Extender Settings After setup, you can access extender settings via any of the methods below. You can reselect host network, change extended network settings and more. Note: If your extender and router use the same network name, Method 1 is recommended. Method 1: Via the Tether App 1. Connect your smartphone to the extender‘s or router’s network. 2. Launch the Tether app, select your extender, and log in. 3. View or change extender settings as needed. Method 2: Via a Web Browser 1.