Installation Instructions

7106505625 REV1.0.1
Quick
Installation
Guide
AC750 WiFi Range Extender
RE210
Two easy setup options:
Option 1: Using WPS (Wi-Fi Protected Setup)
Option 2: Using a Web Browser
1
OPTION
Using WPS (Wi-Fi Protected Setup)
3
Relocate
Keep away from
Enjoy!
RE
Power
RE
Power
RE
Power
Reset
LED
Smart TV Game Console Desktop
Ethernet Connection
Entertainment Adapter
LEDs
Blinking green: WPS connection is in progress.
Solid green: The extender is connected to the
router and is in a good location.
Solid orange: The extender is connected to the
router, but is too close to the router.
Solid red: The extender is connected to the router,
but is too far away from the router.
O: No active connection.
(RE)
(5GHz)
(2.4GHz)
(Power)
On: The extender is connected to the 2.4GHz
wireless network of your main Router/AP.
O: No connection.
On/O: The extender is on or o.
Blinking: The extender is initializing.
On: The extender is connected to the 5GHz
wireless network of your main Router/AP.
O: No connection.
1
Plug the extender into an electrical outlet
near your router, and wait until the Power
LED is lit and solid green.
A. Press the WPS button on your router/AP and immediately press the RE button on your extender.
Power On
2
Connect
Important: Please use Option 2 if your router does not support WPS.
The RE LED should change
from blinking to a solid state after
about 1 minute, indicating that
WPS connection is successful.
If not, please use Option 2.
B. If you are connecting the extender to a dual-band router, but only 2.4GHz or 5GHz LED
is on, repeat step A to connect the other band.
For more information about using WPS on your router,
please refer to the router manufacturer's user guide.
A. Plug the extender into an electrical outlet
about halfway between your router and the
Wi-Fi dead zone.
B. Wait about 1 minute until the RE LED is lit
and stay solid.
Ideal Range Extender Placement
Main Network Extended Network
5GHz
2.4GHz
Solid green Solid red Solid orange
Too far away
from the router
Too close to
the router
Good
connection
Choose a location away from Bluetooth devices and
other household electronics, such as cordless phone,
microwave, and baby monitor, etc., to minimize
signal interference.
Both 2.4GHz and 5GHz extended networks share the same SSID (network name) and password as your main network.
The Range extender can be used as a wireless
adapter to connect any Ethernet-enabled device,
such as a Blu-ray player, game console, DVR, or smart
TV, to your wireless network.
First, connect the extender to your Wi-Fi network by
following the instructions in Option 1 or Option 2,
then connect an Ethernet-enabled device to the
extender using an Ethernet cable as shown in the
diagram on the right.
Router