User Guide AC750 Wi-Fi Range Extender RE200/RE220 REV4.0.
Contents About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1. Get to Know About Your Extender . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 1. 1. 2. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 6. More Features of Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . 34 6. 1. 6. 2. Use Your Extender as a Wireless Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Transform Your Existing Wired Network to a Wireless One. . . . . . . . . . . . . . . . . . . 35 6. 2. 1.To Set Up the Extender as an Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 6. 2. 2.To Connect Your Wireless Devices to the Extender via WPS . . . . . . . . . .
About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them. Note: Features available in Range Extender may vary by model and software version. Range Extender availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Range Extender experience.
Chapter 1 Get to Know About Your Extender This chapter introduces what the extender can do and its appearance.
Chapter 1 1. 1. Get to Know About Your Extender Product Overview Bring Dead Zones Back to Life Tired of Wi-Fi “dead zones”? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached. The device also reduces signal interference to ensure reliable Wi-Fi coverage throughout your home or office. Easy Installation & Quick Position The extender works with any standard wireless router.
Chapter 1 1. 2. 1. Get to Know About Your Extender LED Explanation You can check the extender’s working status by following the LED Explanation table. Name Status 5GHz On/Off 2.4GHz On/Off Solid green (Signal) Solid red Off (Ethernet) (Power) On/Off On/Off Blinking On (WPS) 1. 2. 2. Blinking Off Indication The extender is connected or not connected to the 5GHz wireless network of your host router. The extender is connected or not connected to the 2.
Chapter 2 Set Up Internet Connection This chapter introduces how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection.
Chapter 2 2. 1. Set Up Internet Connection Power On the Extender Plug the extender into an electrical outlet next to your router, and then wait until the Power LED turns solid on. Note: 1. For safety, only plug the extender in upright direction as shown below. 2. The operating temperature should be between 0°C and 40°C (32°F - 104°F). On 2. 2. Set Up the Extender 2. 2. 1.
Chapter 2 Set Up Internet Connection Solid On 3. (Optional) If the extender connects to a dual band router, repeat steps 1 and 2 above to connect to the other band. 4. Relocate your extender for optimal Wi-Fi coverage and performance. 1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router. 2 ) Wait for about 2 minutes until the Signal LED turns solid green.
Chapter 2 Set Up Internet Connection Tips: 1. If you cannot find the network names with _EXT in your Wi-Fi network list, this means that the extender has been connected to a OneMesh router and automatically copied its wireless settings. For more information, refer to OneMesh with Seamless Roaming. 2. For some early firmware versions, the extender share the same network name as your router. 3. If you want to customize the extended network name, refer to Configure Wireless Network. 2. 2. 2.
Chapter 2 Set Up Internet Connection 5. Follow app instructions to set up and relocate your extender. 6. (Optional) Enable Join OneMesh to copy the router’s wireless settings for seamless roaming. For more information about OneMesh, refer to OneMesh with Seamless Roaming. Tips: It is recommended to enable Smart Connect on your host router to enjoy a seamless connection between dual-band networks. With Smart Connect enabled, your host router’s 2.
Chapter 2 • Set Up Internet Connection For Windows Users 1 ) Unplug the Ethernet cable from your computer (if any). 2 ) Click the Wi-Fi icon on the taskbar and connect to the extender’s wireless network: TP-Link_Extender. Connections are available Wireless Network Connection TP-Link_Extender √ • Connect automatically Connect For Mac OS X Users 1 ) Unplug the Ethernet cable from your computer (if any).
Chapter 2 Set Up Internet Connection 3 ) Select your host router’s 5GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next. Tips: If your host router does not support 5GHz wireless network, please click Skip to continue. 4 ) Confirm your host network password. 5 ) Either keep the default SSIDs (network names) or customize them for the extended networks, and then click Next.
Chapter 2 Set Up Internet Connection 6 ) Follow web instructions to relocate your extender for optimal Wi-Fi coverage and performance, and then click Done. 7 ) Enjoy! Connect to the extended network and enjoy the internet.
Chapter 2 Set Up Internet Connection Tips: If you connect the extender to a TP-Link OneMesh router and a success screen as below appears at the end of the setup, the extender has successfully joined the router’s OneMesh network and copied the router’s wireless settings. For more information, refer to OneMesh with Seamless Roaming. Tips: It is recommended to enable Smart Connect on your host router to enjoy a seamless connection between dual-band networks.
Chapter 3 OneMesh with Seamless Roaming This chapter introduces the TP-Link OneMeshTM feature.
Chapter 3 3. 1. OneMesh with Seamless Roaming What‘s a OneMesh Network TP-Link OneMesh router and TP-Link OneMesh extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh’s seamless coverage. Unified Wi-Fi Network Router and extenders share the same wireless settings, including network name, password, access control settings and more.
Chapter 3 3. 2. OneMesh with Seamless Roaming How to Set Up a OneMesh Network Once the extender is connected to a TP-Link OneMesh router via web browser or WPS button, the extender will automatically join the router’s OneMesh network and copy the router’s wireless settings. You can manually join a OneMesh network during the configuration via the TP-Link Tether app. For more information about setting up the extender with OneMesh network, refer to Set Up the Extender.
Chapter 3 OneMesh with Seamless Roaming Tip: If your host router does not support OneMesh, you need to reselect a host network first. Go to Settings > Wireless > Connect to Network and follow the instructions to complete the configuration. 3. Follow the web instructions to join the OneMesh network. After that, you can view all the devices in OneMesh network in Basic > OneMesh on the web management page of your host router. 3. 3. Remove Extender from OneMesh Network 3. 3. 1.
Chapter 3 OneMesh with Seamless Roaming Or 1. Launch Tether and select your host router of the OneMesh network. 2. Go to Tools > OneMesh and select the extender you want to remove from the OneMesh network. 3. Click Remove Device.
Chapter 3 3. 3. 2. OneMesh with Seamless Roaming Method 2: Via a Web Browser 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > OneMesh and disable Join OneMesh.
Chapter 4 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your cloud device with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app on your smartphone or tablet. To ensure that your cloud device stays new and gets better over time, the TP-Link Cloud will notify you when an important firmware upgrade is avaliable.
Chapter 4 4. 1. TP-Link Cloud Service Register a TP-Link ID When you log in after initial setup, the web page will ask whether you need TP-Link Cloud service. You can also access the TP-Link Cloud settings as follows: 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > TP-Link Cloud. 3. Click Register Now and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link Cloud page to log in.
Chapter 4 • TP-Link Cloud Service To change your password: 1. Click behind the Password. 4. 3. Manage the User TP-Link IDs 2. Enter the current password, then a new password twice. And click Save. The TP-Link ID used to log in to the extender for the first time will be automatically bound as the Admin account. An admin account can add or remove other TP-Link IDs to or from the same extender as Users.
Chapter 4 TP-Link Cloud Service • Add/remove other TP-Link IDs to/from the extender. 4. 3. 1. Add TP-Link ID to Manage the Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID. 2. Go to Settings > TP-Link Cloud, and focus on the Bound Accounts section. 3. Click , enter another TP-Link ID as needed and click Save. Note: If you need another TP-Link ID, please register a new one via the Tether app.
Chapter 4 4. 4. TP-Link Cloud Service Manage the Extender via the TP-Link Tether App The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search “TP-Link Tether” or simply scan the QR code to download and install the app. OR 2. Connect your device to the extender’s or host router’s wireless network. 3.
Chapter 5 Customize Your Network This chapter guides you on how to configure network settings that are available for this extender.
Chapter 5 5. 1. Customize Your Network Check Internet Status You can view the internet status of your extender to check whether you have successfully set up the extended network(s). 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Status to view the internet status of your extender. Tips: Click the icon of the Internet/Router/Range Extender/Clients to view the corresponding information. • The extender runs normally.
Chapter 5 5. 2. Customize Your Network Configure Wireless Network If you want to extend another host network after Quick Setup, you can refer to this section. Moreover, you can change the wireless settings for your extended networks. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. • To extend another host network: 1. Go to Settings > Wireless > Connect to Network. 2. Enable Connect to 2.
Chapter 5 Customize Your Network 2. Extended networks are enabled by default. If you want to disable the wireless function of a certain band, just clear the Enable checkbox. In this case, all the wireless settings of this band will be invalid. 3. Click Save. • To change the wireless network name (SSID): 1. Go to Settings > Wireless > Extended Network. 2. Create a new SSID in Extended 2.4GHz SSID or click Copy Host SSID. The value is case-sensitive. 3. Click Save.
Chapter 5 Customize Your Network 7. Click Save. 5. 4. Adjust Wi-Fi Coverage You can set the extender’s Wi-Fi coverage depending on how large you want your Wi-Fi area to be. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Advanced Settings > Wi-Fi Coverage. 3. Select your desired Wi-Fi coverage level for the extender.
Chapter 5 Customize Your Network 4. Click Save. 5. 5. Set Access Control Access Control allows you to permit or block specific devices from accessing the internet for a specific period. Note: Access Control is not available when your range extender is in a OneMesh network, where it automatically synchronizes network settings from your host router. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2.
Chapter 5 Customize Your Network 5. Click Save. • To permit specific device(s): 1. Select Whitelist and click Save. 2. Click Add in the Devices in Whitelist table. Enter the Device Name and MAC Address. And you can set the Effective Time for a certain entry as needed. 3. Click Save.
Chapter 5 5. 6. Customize Your Network Set High Speed Mode The High Speed feature switches off one of the wireless bands to leave one highperformance, super-fast network, ideal for HD streaming and gaming applications. If most of your devices are connected to one wireless band, this feature can increase the overall performance of your wireless network.
Chapter 5 Customize Your Network 5. Click Save.
Chapter 6 More Features of Your Extender This chapter explains how to use the extender as a wireless adapter and as an access point .
Chapter 6 6. 1. More Features of Your Extender Use Your Extender as a Wireless Adapter The extender can be used as a wireless adapter to connect any wired-only device, such as a Blu-ray player, game console, DVR, or smart TV, to your wireless network. After configuration, you can connect an Ethernet-enabled device to the extender via an Ethernet cable. Note: Extenders that have no Ethernet port do not support this feature. Smart TV 6. 2.
Chapter 6 More Features of Your Extender 5. Go to Quick Setup to configure your wireless settings and click Next. 6. Confirm the information and click Finish. 7. Connect to the extended network SSID (network name) and enjoy Wi-Fi.
Chapter 6 6. 2. 2. More Features of Your Extender To Connect Your Wireless Devices to the Extender via WPS Wi-Fi Protected Setup (WPS) provides an easier way to set up a secure Wi-Fi connection. Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can be connected to your extender through this method (not supported by iOS devices). 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Wireless > WPS.
Chapter 7 Manage Your Extender This chapter presents how to manage and maintain your extender.
Chapter 7 7. 1. Manage Your Extender Set System Time The System Time of the extender will be used for time-based function such as the Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be synchronized with the daylight saving time you configure. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Time Settings. • To get system time: 1.
Chapter 7 Manage Your Extender 2. Go to Settings > System Tools > LED Control. • To turn off the LEDs: • To specify a time period when LEDs are off: Disable LED Status. 1. Enable Night Mode. 2. Specify the LED off time period, and the LED will be off during this period every day. Note: The effective LED off time is based on the time of the extender. You can go to Settings > System Tools > Time Settings to modify the time. 3. Click Save. 7. 3.
Chapter 7 Manage Your Extender 3. Click Save. 7. 4. Upgrade the Firmware TP-Link is committed to improving product features, giving you a better network experience. You can download the latest firmware file from Download Center at https://www.tp-link.com/support/ and upgrade the extender to the latest firmware version. Note: • Make sure the latest firmware file is matched with the hardware version (as shown in the download section of the Support page).
Chapter 7 7. 4. 2. Manage Your Extender Local Upgrade 1. Download the latest firmware file for the extender from our website https://www.tp-link.com. 2. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 3. Go to Settings > System Tools > Firmware Upgrade. 4. Click Browse to locate the downloaded new firmware file, and then click Upgrade. 5. Wait a few minutes for the firmware upgrade to complete and the extender to reboot. 7. 5.
Chapter 7 • Manage Your Extender To restore previous settings from a saved file: Click Browse to locate the backup configuration file stored on your computer, and click Restore. Note: During the restore process, do not power off or reset the extender. • To restore configuration settings: In Factory Default Restore, click Restore to restore all configuration settings to default values, except your login and cloud account information.
Chapter 7 7. 6. Manage Your Extender Change Login Password The account management feature allows you to change your login username and password of the web management webpage. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Admin Account. 3. Enter the old password. Then enter the new password twice (case-sensitive) and click Save. Then you can use the new password for future logins. 7. 7.
FAQ Q1. How to reset the extender to its factory default settings? • With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot. • Log in to the extender’s web management page. Go to Settings > System Tools > Backup & Restore and click Factory Restore. Q2.
• Use the IP address to access the extender. The default IP is 192.168.0.254. If the extender is connected to the router, you should go to your router’s DHCP client list to obtain the extender’s current IP address. • Reset the extender and try again. Q5. I have enabled wireless MAC filter, wireless access control, or access control list (ACL) on my router.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co., Ltd.
FCC compliance information statement Product Name: AC750 Wi-Fi Range Extender Model Number: RE200 / RE220 Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2400 MHz -2483.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Caution: 1.
NCC Notice & BSMI Notice 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅 自變更頻率、加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象 時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業 之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機 設備之干擾。 4.7.9.1應避免影響附近雷達系統之操作。 4.7.9.
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. • Do not use the device where wireless devices are not allowed. • The socket-outlet shall be installed near the equipment and shall be easily accessible.
