User Guide 300Mbps Wi-Fi Range Extender RE105 REV5.0.
Contents About This Guide..........................................................................................................1 Chapter 1. Get to Know About Your Extender . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 1. 1. 2. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them. Features available in the extender may vary by model and software version. Extender availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual extender experience.
TP-Link Community is provided for you to discuss our products and share knowledge at https://community.tp-link.com. Our Technical Support contact information can be found at Contact Technical Support page at www.tp-link.com/support.
Chapter 1 Get to Know About Your Extender This chapter introduces what the extender can do and its appearance.
Get to Know About Your Extender Chapter 1 1. 1. Product Overview Bring Dead Zones Back to Life Tired of Wi-Fi “dead zones”? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached. The device also reduces signal interference to ensure reliable Wi-Fi coverage throughout your home or office. Easy Installation & Quick Position The extender works with any standard wireless router.
Get to Know About Your Extender Chapter 1 1. 2. 1. LED Explanation You can check the extender’s working status by following the LED Explanation table. Name Signal Status Solid blue The extender is connected to your router’s wireless network and is in a suitable location. Solid red The extender is experiencing poor signal strength. Try relocating it closer to your router. Blinking WPS connection is in progress. Off Power 1. 2. 2. Indication No wireless connection is established.
Chapter 2 Set Up Internet Connection This chapter informs you how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection.
Chapter 2 2. 1. Set Up Internet Connection Power On the Extender Plug the extender into an electrical outlet near your host router, and then wait until the Power LED turns solid on. Note: For safety, we suggest that you plug the extender in upright directions as shown below. Solid On 2. 2. Set Up the Extender 2. 2. 1. Method 1: Via the WPS Button There are three ways to connect to the host network: via the WPS button, via a web browser, or via the Tether app.
Chapter 2 Set Up Internet Connection If the LED does not turn solid on, try again or refer to Method 2: Via the TP-Link Tether App or Method 3: Via a Web Browser. 3. The extender uses your router’s network name with _EXT at the end and shares the same password as your router. Extended Network Name: Router’s network name with _EXT at the end Password: Same as your router’s Note: If you want to customize the extended network name, refer to Configure Wireless Network. 4.
Chapter 2 Set Up Internet Connection 3. Click + and choose Range Extender. 4. Follow the on-screen instructions to complete the configuration. Tips: 1. For more intuitive location assistance, access extender settings via Tether and go to Tools > Location Assistant. 2. You can also manage your extender via Tether, such as controlling LEDs, sharing the password of your network and blocking devices. 2. 2. 3. Method 3: Via a Web Browser 1.
Chapter 2 Set Up Internet Connection 2. Follow the instructions of Quick Setup Wizard to connect the extender to your host router. 1 ) Launch a web browser, enter http://tplinkrepeater.net or http://192.168.0.254 in the address field, create a password for future logins, and click LOG IN. Note: If the login window does not appear, please refer to FAQ. 2 ) Select your host router’s 2.4GHz SSID (network name), enter its password (NOT the password you just created for logins), and click NEXT.
Chapter 2 Set Up Internet Connection 4 ) Either keep the default SSID (network name) or customize it for the extended network, and then click NEXT. 5 ) Follow web instructions to relocate your extender for optimal Wi-Fi coverage and performance, then click DONE . 6 ) Enjoy! Connect to the extended network and click FINISH to enjoy internet.
Chapter 2 Set Up Internet Connection 12
Chapter 3 Customize Your Network This chapter guides you on how to configure network settings that are available for this extender.
Chapter 3 3. 1. Customize Your Network Check Internet Status You can view the internet status of your extender to check whether you have successfully set up the extended network(s). 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Network Map to view the internet status of your extender. • The extender is functioning normally. • The extender is not connected to the host network.
Chapter 3 3. 2. Customize Your Network Configure Wireless Network If you want to extend another host network after Quick Setup, you can refer to this section. Moreover, you can change the wireless settings for your extended network. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. • To extend another host network: 1. Go to Wireless and locate the Connect to Host Network section. 2. Click WIRELESS SCANNER to find all available networks. 3.
Chapter 3 Customize Your Network 2. Create a new SSID in Extended 2.4GHz SSID or click COPY HOST SSID. The value is case-sensitive. 3. Click SAVE. 4. Click Sharing Network to save the picture of SSID, password and QR code for quickly sharing network. Note: If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are applied. Please write down the new SSID for future use. • To hide the SSID of the extended network: 1.
Chapter 3 Customize Your Network another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Network. 3. Select Use the following IP address. 4. Enter a new IP address as needed and leave the Subnet Mask as the default settings. 5. Enter the gateway that is in the same subnet as the IP Address.
Chapter 3 Customize Your Network 4. Click SAVE. 3. 5. Set Access Control Access Control allows you to permit or block specific devices from accessing internet for a specific period. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Access Control. 3. Enable Access Control. • To block specific device(s): Note: Devices connected to the extender via an Ethernet cable cannot be blocked. 1. Select Blacklist.
Chapter 3 Customize Your Network 2. Click Add. 3. Select the device to be blocked in the online devices list and click ADD. 4. Click SAVE. 5. Now the device is added to the blacklist. You can click blacklist. to remove it from the 6. Or go to Network Map and click the icon of Clients to check the status of connected devices. • Click View Blacklist to see the devices in blacklist. • Click of the corresponding device to add it to the blacklist.
Chapter 3 • Customize Your Network To permit specific device(s): 1. Select Whitelist and click SAVE. 2. Click Add. 3. Select the device to be added in the whitelist. • Select From Device List Select the device from the device list and click ADD. • Add Manually 1 ) Enter the Device Name and MAC Address of the device that you want to add to the whitelist. 2 ) Click ADD.
Chapter 3 Customize Your Network 4. Now the device is added to the blacklist. You can click blacklist. to remove it from the 5. Or go to Network Map and click the icon of Clients to check the status of connected devices. • Click View Whitelist to see the devices in blacklist. • Click of the corresponding device to add it to the blacklist.
Chapter 4 More Features of Your Extender This chapter explains how to use the extender as a wireless adapter and as an access point.
Chapter 4 4. 1. More Features of Your Extender Use Your Extender as a Wireless Adapter The extender can be used as a wireless adapter to connect any wired-only device, such as a Blu-ray player, game console, DVR, or smart TV, to your wireless network. After configuration, you can connect an Ethernet-enabled device to the extender via an Ethernet cable. Ethernet Connection Smart TV 4. 2.
Chapter 4 More Features of Your Extender 2 ) Confirm the information and save the picture for sharing network. Then click FINISH. Now, you can enjoy Wi-Fi.
Chapter 5 Manage Your Extender This chapter presents how to manage and maintain your extender.
Chapter 5 Manage Your Extender 5. 1. Set Up System Time 5. 1. 1. To get system time: The System Time of the extender will be used for time-based functions such as the Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be synchronized with the daylight saving time you configure. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Time Settings. 3.
Chapter 5 5. 1. 2. Manage Your Extender To set up Daylight Saving Time: 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Time Settings and locate the Daylight Saving Time section. 3. Select Enable Daylight Saving Time. 4. Select the Start and End date and time of the daylight saving time at your local time zone. 5. Click SAVE. 5. 2. Control LEDs The LEDs of the extender indicate its activities and status.
Chapter 5 Manage Your Extender Note: The effective LED off time is based on the system time of the router. Please go to Settings > System Tools > Time Settings to set up the correct time. 5. 3. Power Schedule The Power Schedule feature allows you to specify a time period during which the extender is off. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Power Schedule. 3. Click Add. 4.
Chapter 5 Manage Your Extender 5. Click SAVE. Note: The effective power-off time is based on the system time of the router. Please go to Settings > System Tools > Time Settings to set up the correct time. 5. 4. Upgrade the Firmware TP-Link is committed to improving product features, giving you a better network experience. You can download the latest firmware file from the Support page of our website www.tp-link.com and upgrade the firmware to the latest version. Note: 1.
Chapter 5 Manage Your Extender 5. Wait a few minutes for the firmware upgrade to complete and the extender to reboot. 5. 5. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the extender. You can back up the configuration file and restore the extender to the previous settings from the backup file when needed. Moreover, if necessary, you can erase the current settings and reset the extender to the default factory settings. 1.
Chapter 5 Manage Your Extender 2. Wait a few minutes for the restore and reboot. Note: During the restore process, do not power off or reset the extender. • To reset the extender to factory default settings: 1. Click FACTORY RESTORE to reset the extender. 2. Wait a few minutes for the reset and reboot. Note: 1. During the reset process, do not power off or reset the extender. 2. We strongly recommend you backup the current configuration settings before resetting the extender. 5. 6.
Chapter 5 • Manage Your Extender To Reboot Automatically 1. Locate the Reboot Schedule section and check the box to enable Reboot Schedule. 2. Specify the Reboot Time when the router reboots and Repeat to decide how often it reboots. Note: The effective reboot time is based on the system time of the router. Please go to Settings > System Tools > Time Settings to set up the correct time. 3. Click Save. 5. 7.
Chapter 5 5. 8. Manage Your Extender System Log If the extender is not working normally, you can save the system log and send it to our technical support team. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > System Log. • To save the system log locally: 1. Choose the type and level of the system log as needed. 2. Click SAVE LOG to save the system logs to a local disk.
FAQ Q1. How to reset the extender to its factory default settings? • With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot. • Log in to the extender’s web management page. Go to Settings > System Tools > Restore & Backup and click Factory Restore. Q2. What can I do if I forgot my login password? Refer to FAQ > Q1 to reset the extender, and create a new password for future logins. Note: The extender must be reconfigured after a reset to access internet.
3. Connect all of your devices to the extended network, and make sure the router’s Link LED remains lit. 4. On your router, add all the Online Devices’ MAC addresses to your router’s MAC filter table. 5. Enable the router’s MAC filter, wireless access control, or ACL to complete the configuration.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd.
FCC compliance information statement Product Name: 300Mbps Wi-Fi Range Extender Model Number: RE105 Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2400 MHz -2483.5 MHz (20dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements 당해 무선설비는 운용중 전파혼신 가능성이 있음.
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. • Do not use the device where wireless devices are not allowed. • The socket-outlet shall be installed near the equipment and shall be easily accessible.
