user manual

TL-WR700N
150Mbps Wireless N Mini Pocket Router
- 119 -
Figure 7-10 DHCP Settings
Figure 7-11 DHCP Settings
 DHCP Server - Selecting the radio button before Disable/Enable will disable/enable the
DHCP server on your Range Extender. The default setting is Enable. If you disable the
Server, you must have another DHCP server within your network or else you must manually
configure the computer.
 Start IP Address - This field specifies the first address in the IP Address pool. 192.168.0.100
is the default start IP address.
 End IP Address - This field specifies the last address in the IP Address pool. 192.168.0.199
is the default end IP address.
 Address Lease Time - Enter the amount of time for the PC to connect to the Range Extender
with its current assigned dynamic IP address. The time is measured in minutes. After the time