user manual
TL-WR700N 
150Mbps  Wireless N Mini Pocket Router 
- 98 - 
server in this device will not start up.   
3.  If the new LAN IP address you set is not in the same subnet with the previous one, the IP 
Address pool in the DHCP server will be configured automatically, but the Virtual Server and 
DMZ Host will not take effect until they are re-configured. 
6.6  Wireless 
Figure 6-7 Wireless menu 
There are two submenus under the Wireless menu (shown in Figure 6-7): Wireless Settings and 
Wireless Security.  Click  either  of them, and  you will be able to configure the corresponding 
function.   
6.6.1  Wireless Settings 
Choose menu “Wireless 
→
  Wireless Settings”, and then you can configure the basic settings 
for the wireless network on this page. 
Figure 6-8 Wireless Settings - Bridge 
  SSID -  Enter a string of up to 32 characters. The same name of SSID  (Service Set 
Identification) must be assigned to all wireless devices in your network. The default SSID is 
set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each 
Router’s MAC address).  But it is recommended strongly that you change your networks 










