TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router Rev: 1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission fromTP-LINK TECHNOLOGIES CO., LTD. Copyright © 2011 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Package Contents The following items should be found in your box: ¾ ¾ ¾ One TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router One power cord for TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router One Resource CD for TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router, including: • This User Guide • Other Helpful Information ) Note: 1) 2) The provided power cord may be different due to local power specifications. Make sure that the package contains the above items.
CONTENTS Chapter 1. Introduction ........................................................................................ 1 1.1 Overview of the Router .................................................................................................. 1 1.2 Features......................................................................................................................... 1 1.3 Conventions......................................................................................................
4.8 4.9 4.7.3 Target .............................................................................................................................40 4.7.4 Schedule ........................................................................................................................41 IPsec VPN ................................................................................................................... 42 4.8.1 IKE................................................................................
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Chapter 1. Introduction 1.1 Overview of the Router The TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router from TP-LINK provides multiple VPN protocols and high VPN performance. Abundant security strategies, such as SPI firewall, protect your network against the attacks and Access Control, provide online behavior management. Anymore, web-based management makes the network setup be an easy work.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Chapter 2. Hardware installation 2.1 Panel Layout 2.1.1 The Front Panel The Router’s LEDs are located on the front panel (Viewed from left to right). Figure 2-1 LED Descriptions: Name PWR SYS Status Indication Not lit The router is powered off. Lit up (Green) The router is powered on. Not lit The router has a hardware error. Lit up (Green) The router has a hardware error. Flashing (Green) Not lit The router works properly.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Method one: Use the Factory Defaults function on System Tools -> Factory Defaults page in the router's Web-based Utility. Method two: With the router powered on, use a pin to press and hold the RESET button (about 5 seconds) until the SYS LED lights up and flashes. And then release the button and wait the router to reboot to its factory default settings. ) Note: 1) 2) Please use only the power cord provided with this Router.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide ) Note: If you intend to connect the Router to the ground via the PE（Protecting Earth）cable of AC power cord, please make sure the PE（Protecting Earth）cable in the electrical outlet is well grounded in advance. 2.5 Connecting the Router Before you install the router, you should connect your PC to the Internet through your broadband service successfully. If there is any problem, please contact your ISP for help.
TL-R600VPN 2. 3. 4. 5. SafeStreamTM Gigabit Broadband VPN Router User Guide Connect the PC(s) and all Switches/Hubs on your LAN to the LAN Ports on the router, shown in Figure 2-3. Connect the DSL/Cable modem to the WAN port on the router, shown in Figure 2-3. Connect the AC power adapter to the AC power socket on the router, and the other end into an electrical outlet. The router will start to work automatically. Power on your PC(s) and Cable/DSL modem.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Chapter 3. Quick Installation Guide This chapter describes how to configure the basic functions of your TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router. These procedures only take you a few minutes. You can access the Internet via the router immediately after it has been successfully configured. 3.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 3-2 Step 3: In the next screen, select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Step 4: Configure the IP address as shown in Figure 3-4. After that, click OK. Figure 3-4 ) Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above. For Windows 98 OS or earlier, the PC and router may need to be restarted. Now, you can run the Ping command in the command prompt to verify the network connection.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Router. Figure 3-6 You can check it follow the steps below: ) Note: 1) Is the connection between your PC and the Router correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP configuration for your PC correct? If the Router's IP address is 192.168.0.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 3-7 ) Note: If the above screen (Figure 3-7) does not prompt, it means that your web-browser may be set to a proxy. Choose Tools menu→Internet Options→Connections→LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. Step 1: Select the Quick Setup tab on the left of the main menu and the “Quick Setup” screen will appear. Click the Next button.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide ) Note: Four ways to connect to Internet are provided in Quick Setup. Please select one compatible with your ISP. If you are given another way not listed here, refer to Network→ WAN for detailed list. Step 3: If Auto-Detect is chosen, the router will detect the Internet connection type provided by your ISP automatically. Figure 3-10 Step 4: If you choose PPPoE, you will see the screen as shown in Figure 3-11.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Step 7: After that, you will see the next screen. Click Finish to complete the quick installation.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Chapter 4. Configuring the Router It is recommended to use the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, you need to read this chapter and configure advanced settings though the Web-based Utility. After a successful login, you can configure and manage the router. There are main menus on the left of the Web-based Utility.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-1 ¾ LAN - This field displays the current information for the LAN, including the “MAC address”, “IP address” and “Subnet Mask”. ¾ WAN - This field displays the parameters applied to the WAN port of the router, including “MAC address”, “IP address”, “Subnet Mask”, “Default Gateway” and so on.
TL-R600VPN 4.2 SafeStreamTM Gigabit Broadband VPN Router User Guide Quick Setup Please refer to chapter 3"Quick Installation Guide". 4.3 Network Choose menu “Network”, the next submenus are shown below. Figure 4-2 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.3.1 WAN Choose menu “Network→WAN”, you can configure the IP parameters of the WAN on the screen below.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-3 ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.
TL-R600VPN 2. SafeStreamTM Gigabit Broadband VPN Router User Guide Static IP If you are given a fixed IP (static IP), please select Static IP (shown in Figure 4-4), and then fixed IP parameters specified by your ISP. Figure 4-4 ¾ IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. ¾ Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-5 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time).
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide ) Note: Only you have set the system time on System Tools→Time screen, will the Time-based Connecting function take effect. ¾ Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router will disconnect your Internet connection, and not be able to re-establish your connection automatically even though you attempt to access the Internet again.
TL-R600VPN ¾ SafeStreamTM Gigabit Broadband VPN Router User Guide ISP Specified IP Address - If you know that your ISP does not automatically transmit your IP address to the router during login, select Use IP Address specified by ISP and enter the IP address in dotted-decimal notation, which your ISP provided. ¾ Detect Online Interval - The default value is 0, you can input the value between 0 and 120. The router will detect Access Concentrator online at every interval between the times.
TL-R600VPN ¾ SafeStreamTM Gigabit Broadband VPN Router User Guide Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-8 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time).
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link requested. ) Note: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time because some applications visit the Internet continually in the background. 6. PPTP/Russia PPTP If your ISP provides PPTP connection, please select PPTP/Russia PPTP option.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. ¾ Connect Manually - You can configure the router to make it connect or disconnect manually.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Server and DMZ Host may change accordingly at the same time; you’d better re-configure it as well. 4.3.3 MAC Clone Choose menu “Network→MAC Clone”, you can configure the MAC address of the WAN on the screen below (shown in Figure 4-11). Some ISPs require that you register the MAC address of your adapter, which is connected to your cable, DSL modem or Ethernet during installation. You do not generally need to change anything here.
TL-R600VPN 4.4 SafeStreamTM Gigabit Broadband VPN Router User Guide DHCP Choose menu “DHCP”, the next submenus are shown below. Figure 4-12 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.4.1 DHCP Settings Choose menu “DHCP→DHCP Settings”, you can configure the DHCP in the next screen (shown in Figure 4-13).
TL-R600VPN ¾ SafeStreamTM Gigabit Broadband VPN Router User Guide Address Lease Time - This is the amount of time in which a network user will be allowed connection to the router with their current dynamic IP address. Enter the amount of time (in minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. ¾ Default Gateway - Suggest inputting the IP address of the LAN port of the router, default value is 192.168.0.1.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-15 ¾ MAC Address - This field displays the MAC address of the PC for which you want to reserve IP address. ¾ Assigned IP Address - This field displays the IP address of the router reserved. ¾ Status - This field displays the status of the virtual server entry. Enabled means that the entry will take effect, Disabled means that the entry will not take effect.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.5 Forwarding Choose menu “Forwarding”, the next submenus are shown below. Figure 4-17 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.5.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide To add/modify a virtual server entry: Step 1: Click Add New…/Modify shown in Figure 4-18, you will see a new screen shown in Figure 4-19.
TL-R600VPN 4.5.2 SafeStreamTM Gigabit Broadband VPN Router User Guide Port Triggering Choose menu “Forwarding→Port Triggering”, you can view and add port triggering in the next screen (shown in Figure 4-20). Some applications require multiple connections, like Internet games, video conferencing, Internet calling and so on. These applications cannot work with a pure NAT router. Port Triggering is used for some of these applications that can work with an NAT router.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide To add/modify a port triggering entry: Step 1: Click Add New…/Modify shown in Figure 4-20, you will see a new screen shown in Figure 4-21.
TL-R600VPN 4.5.3 SafeStreamTM Gigabit Broadband VPN Router User Guide DMZ Choose menu “Forwarding→DMZ”, you can view and configure DMZ host in the screen (shown in Figure 4-22). The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing. DMZ host forwards all the ports at the same time.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-23 ¾ Current UPnP Status - If you want to use the Router’s UPnP function, please click Enable button. If you don’t want use the function, please click Disable button. Allowing the function may cause a risk to security; this feature is disabled by default. ¾ App Description - This displays the description provided by the application in the UPnP request.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-25 ¾ Firewall - Enable the general firewall or not. • SPI Firewall - SPI (Stateful Packet Inspection) keeps track of the state of network connections traveling across it. It distinguishes legitimate packets for different types of connections. Only packets matching a known active connection will be allowed by the firewall; others will be rejected. SPI Firewall is enabled by factory default.
TL-R600VPN 4.6.2 SafeStreamTM Gigabit Broadband VPN Router User Guide Advanced Security Choose menu “Security→Advanced Security”, you can protect the Router from being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood in the next screen (shown in Figure 4-26). Figure 4-26 ¾ Packets Statistics Interval - This is the interval for capturing the statistics. ¾ DoS Attack Defense - Enable or disable the DoS Attack Defense.
TL-R600VPN 4.6.3 SafeStreamTM Gigabit Broadband VPN Router User Guide Local Management Choose menu “Security→Local Management ”, you can configure to prevent the local PCs from accessing the router’s web-based utility in the next screen (shown in Figure 4-27).
TL-R600VPN 4.7.1 SafeStreamTM Gigabit Broadband VPN Router User Guide Rule Choose menu “Access Control →Rule”, you can configure the Internet Access Control to manage Internet activities from LAN hosts in the next screen (shown in Figure 4-29). Figure 4-29 ¾ Enable Internet Access Control: Enable or disable the Internet Access Control. ¾ Default Filter Policy: Select a policy to allow or deny the packets matching the rules to pass through the Router.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-30 Step 3: Click the Save button. Other configurations for the entries as shown in Figure 4-29: Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Step 2: Select the Mode and enter the Host Description and LAN IP Address. Figure 4-32 Step 3: Click the Save button. Other configurations for the entries as shown in Figure 4-31: Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.7.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-34 Step 3: Click the Save button. Other configurations for the entries as shown in Figure 4-33: Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.7.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide To add/modify a target for Access Control Rule: Step 1: Click Add New…/Edit shown in Figure 4-35, you will see a new screen shown in Figure 4-36. Step 2: Enter the Schedule Description and select the days, and then specify the Start Time and Stop Time. Figure 4-36 Step 3: Click the Save button. Other configurations for the entries as shown in Figure 4-35: Click the Delete All button to delete all the entries.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-38 ¾ Policy Name: The unique name to the IKE policy for identification and management purposes. ¾ Exchange Mode: Displays the IKE Exchange Mode in phase 1, and the remote VPN peer uses the same mode. z Main: Main mode provides identity protection and exchanges more information, which applies to the scenarios with higher requirement for identity protection.
TL-R600VPN z ¾ SafeStreamTM Gigabit Broadband VPN Router User Guide DH3: 1536 bits Pre-shared Key: The Pre-shared Key for IKE authentication, and ensure both the two peers use the same key. The key should consist of visible characters without blank space. To add/modify an IKE entry: Step 1: Click Add New…/Modify shown in Figure 4-38, you will see a new screen shown in Figure 4-39.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-40 ¾ IPSec: Enable or disable IPsec and click save to apply. ¾ Policy Name: The unique name to the IPsec policy for identification and management purposes. ¾ Local Subnet: The IP address range on your local LAN to identify which PCs on your LAN are covered by this policy. It's formed by IP address and subnet mask.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-41 ¾ Policy Name: Enter the unique name to the IPsec policy for identification and management purposes. ¾ Local Subnet: Enter the IP address range on your local LAN to identify which PCs on your LAN are covered by this policy. It's formed by IP address and subnet mask. ¾ Remote Subnet: Enter the IP address range on your remote network to identify which PCs on the remote network are covered by this policy.
TL-R600VPN Encryption Algorithm: SafeStreamTM Gigabit Broadband VPN Router User Guide Select the Encryption Algorithm for IPsec policy. The default value is “Auto”. IKE Security Policy: Select the IKE Security Policy for IPsec policy. PFS Group: Select the PFS (Perfect Forward Security) for IKE mode to enhance security. This setting should match the remote peer. With PFS feature, IKE negotiates to create a new key in Phase2.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide authentication key at the other end of the tunnel, and vice versa. In Encryption Key: Specify the Inbound Encryption Key manually if ESP protocol The inbound key here must match the outbound Encryption Key at the other end of the tunnel, and vice versa. Outgoing SPI: Specify the Outgoing SPI (Security Parameter Index) manually. The Outgoing SPI here must match the Incoming SPI value at the other end of the tunnel, and vice versa.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-42 This page displays the connection status of the IPsec Policy. As Security Association is unidirectional, an ingoing SA and an outgoing SA are created to protect data flows for each tunnel after IPsec tunnel is successfully established. The ingoing SPI value and outgoing SPI value are different. However, the Incoming SPI value must match the Outgoing SPI value at the other end of the tunnel, and vice versa.
TL-R600VPN ¾ SafeStreamTM Gigabit Broadband VPN Router User Guide MPPE Encryption – Enable or disable the MPPE Encryption. If enabled, the PPTP tunnel will be encrypted by MPPE. ¾ IP Range Start - Enter the start IP address to define a range for the server's IP assignment. ¾ IP Range End - Enter the end IP address to define a range for the server's IP assignment. 4.9.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.9.3 Connection Status Choose the menu PPTP VPN Server→Connection Status, you can view the connection status of each user in the next screen (shown in Figure 4-47). Figure 4-47 ¾ Remote IP Address – Displays the original IP address of the remote client.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide To add/modify a static routing entry: Step 1: Click Add New…/Modify shown in Figure 4-48, you will see a new screen shown in Figure 4-49. Step 2: Enter the appropriate Destination IP Address, Subnet Mask and Default Gateway, and then select the status. Figure 4-49 Step 3: Click Save to make the entry take effect. ) Note: If you want to add more than one static route, please go to step 1 to continue.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-51 ¾ Enable Bandwidth Control - Enable or disable the Bandwidth Control. ¾ Line Type - Select the Line Type of the WAN port. ¾ Egress/Ingress Bandwidth – Enter the Egress and Ingress Bandwidth through the WAN port. 4.11.2 Rule List Figure 4-52 ¾ Description - This is the information about the rules such as address range.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-53 Step 3: Click the Save button. Other configurations for the entries as shown in Figure 4-52: Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.12 IP & MAC Binding Choose menu “IP & MAC Binding”, the next submenus are shown below.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide ¾ MAC Address - This field displays the MAC address of the controlled computer in the LAN. ¾ IP Address - This field displays the assigned IP address of the controlled computer in the LAN. ¾ Bind - Select whether enable the ARP binding or not. Only bind the MAC address and IP address can the function take effect.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Step 4: Click Back to return the previous screen. ) Note: You can click “to page” to edit the entry in the corresponding screen. Other configurations for the entries as shown in Figure 4-55: Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Click Delete to load the specific item to the IP & MAC Binding list. Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Binding list (shown in Figure 4-55). Click the Refresh button to refresh all items. ) Note: An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been loaded before. 4.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Click Logout to logout the DDNS service. The status of the DDNS service connection is displayed in the Connection Status field. 4.13.2 PeanutHull DDNS If your dynamic DNS Service Provider is www.oray.net, you can configure in the next screen (shown in Figure 4-60). Figure 4-60 To set up for PeanutHull DDNS, follow these instructions: Step 1: Type the User Name and Password for your DDNS account.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-61 To set up for Comexe DDNS, follow these instructions: Step 1: Enter the domain name your dynamic DNS service provider offer. Step 2: Type the “User Name” and “Password” for your DDNS account. Step 3: Enable DDNS, and click Save to save the current configuration. Click Login to login the DDNS service. Click Logout to logout the DDNS service. The status of the DDNS service connection is displayed in the Connection Status field. 4.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-62 To set up for No-IP DDNS, follow these instructions: Step 1 Type the “User Name” and “Password” for your DDNS account. Step 2 Enter the Domain Name your dynamic DNS service provider offered. Step 3 Enable DDNS, and click Save to save the current configuration. Click Login to login the DDNS service. Click Logout to logout the DDNS service. The status of the DDNS service connection is displayed in the Connection Status field. 4.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide 4.14.1 Time Settings Choose menu “System Tools→Time Settings”, you can configure the time on the screen (shown in Figure 4-64). Figure 4-64 ¾ Time zone - Select your local time zone from this pull down list. ¾ Date - Enter your local date in MM/DD/YY into the right blanks. ¾ Time - Enter your local time in HH/MM/SS into the right blanks. To configure the system time manually: Step 1: Select your local time zone.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide 4.14.2 Diagnostic Tools Choose menu “System Tools→Diagnostic Tools”, you can test the connectivity between the router and the destination on this page. Figure 4-65 ¾ Diagnostic Tool - Choose the diagnostic tool. Ping and Tracert are available. ¾ IP address/Domain Name - Enter destination IP address or Domain name here. ¾ Ping Count -Indicates the number of Echo Request messages sent. The default is 4.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-66 ¾ Firmware Version - This displays the current firmware version. ¾ Hardware Version - This displays the current hardware version. The hardware version of the upgrade file must accord with the Router’s current hardware version. To upgrade the router's firmware, follow these instructions below: Step 1: Download a more recent firmware upgrade file from the TP-LINK website (http://www.tp-link.com).
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide ) Note: 1) The default User Name is admin. 2) The default Password is admin. 3) The default IP Address is 192.168.0.1. 4) The default Subnet Mask is 255.255.255.0. All settings you have saved will be lost when the default settings are restored. 4.14.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-70 To restore the Router’s settings: Step 1: Click the Browse button to locate the update file for the device, or enter the exact path to the Setting file in the text box. Step 2: Click the Restore button to complete. 4.14.6 Reboot Choose menu “System Tools→Reboot”, click the Reboot button to reboot the router via the next screen.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide 6) Upgrade the firmware of the router (system will reboot automatically). 7) Restore the router's settings to factory default (system will reboot automatically). 4.14.7 Password Choose menu “System Tools→Password”, you can change the factory default user name and password of the router in the next screen (shown in Figure 4-72). After configuration, click the Save button.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-73 The router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the Refresh button to refresh the logs. Click the Save Log button to save all the logs in a text file. Click the Mail Log button to send the logs to the specified mailbox. Click the Clean All button to clean all the logs. 4.14.
TL-R600VPN ¾ SafeStreamTM Gigabit Broadband VPN Router User Guide Remote Management IP Address - This is the current address you will use when accessing your router from the Internet. The default IP address is 0.0.0.0. It means this function is disabled. To enable this function, change the default IP address to another IP address as desired.
TL-R600VPN IP Address MAC Address Total Packets Bytes Packets Bytes Current ICMP Tx UDP Tx SafeStreamTM Gigabit Broadband VPN Router User Guide The IP address whose statistics information are displayed The total amount of packets received and transmitted by the router The total amount of bytes received and transmitted by the router The total amount of packets received and transmitted in the last “Packets Statistic interval” seconds The total amount of bytes received and transmitted in the last “Packets
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Appendix A: Specifications General Standards and Protocols IEEE 802.3、IEEE 802.3u、IEEE 802.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Appendix B: Preventing Lightning To avoid damage during a lightning storm and ensure a stable performance, our router has adopted the professional lightning protection technology to prevent the lightning. However, although these measures have been taken to protect TL-R600VPN from lightning, if the lightning intensity exceeds a certain range, damage to the router may still happen.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Appendix C: FAQ 1. How do I configure the router to access Internet by ADSL users? Step 1: First, configure the ADSL modem in RFC1483 bridge model. Step 2: Connect the Ethernet cable from your ADSL modem to the WAN port on the router. The telephone cord plugs into the Line port of the ADSL modem. Step 3: Login to the router, click the menu Network→WAN on the left of your browser.
TL-R600VPN 2. SafeStreamTM Gigabit Broadband VPN Router User Guide How do I configure the router to access Internet by Ethernet users? Step 1: Login to the router, click the menu Network→WAN on the left of your browser, On the WAN screen, select “Dynamic IP” for "WAN Connection Type", and finish it by clicking Save. Step 2: Some ISPs require that you register the MAC address of your adapter, which is connected to your cable or DSL modem during installation.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4 ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. Method two: Use DMZ Host Login to the router, click the menu Forwarding→DMZ. On the DMZ screen, select “Enable”, and enter your IP address into the “DMZ Host IP Address” field (using 192.168.0.102 as an example), then to click the Save button. Figure 5 7.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 6 ) Note: If the above configuration takes effect, you should login the Router by entering http://192.168.0.1:88 (the router’s LAN IP address: Web Management Port) in the address field of the web browser.
TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Appendix D: Glossary ¾ DDNS (Dynamic Domain Name System) - The capability of assigning a fixed host and domain name to a dynamic Internet IP address. ¾ DHCP (Dynamic Host Configuration Protocol) - A protocol that automatically configure the TCP/IP parameters for the all the PCs that are connected to a DHCP server.
