user manual

8
T1. How do I restore my Router’s configuration to its factory default settings?
TL-R402M:
TL-R460:
TL-R860:
T2. What can I do if I don’t know or forgot my password?
1) Restore the Router’s configuration to its factory default settings. If you don’t
know how to do that, please refer to section T1.
2) Use the default user name and password: admin, admin.
3) Try to configure your Router once again by following the instructions in the
previous steps of the QIG.
T3. What can I do if I cannot access the web-based configuration page?
1) Configure your computer’s IP Address.
With the Router powered on, press and hold the Reset/RESET button on the panel
for 8 to 10 seconds before releasing it.
Note
Once the Router is reset, the current configuration settings will be lost and
you will need to re-configure the Router.