user manual

Archer C2 AC750 Wireless Dual Band Gigabit Router
- 89 -
There are four submenus under the Access Control menu: Rule, Host, Target and Schedule (as
shown in Figure 4-75). Click any of them, and you will be able to configure the corresponding
function.
4.15.1 Rule
Choose menu “Access Control → Rule”, and then you can view and set Access Control rules in
the screen as shown in Figure 4-76.
Figure 4-76 Access Control Rule Management
 Enable Internet Access Control - Select the check box to enable the Internet Access
Control function, so the Default Filter Policy can take effect.
 Description - Here displays the name of the rule and this name is unique.
 LAN Host - Here displays the host selected in the corresponding rule.
 Target - Here displays the target selected in the corresponding rule.
 Schedule - Here displays the schedule selected in the corresponding rule.
 Enable - Here displays the status of the rule, enabled or not. Check this option to enable a
specific entry.
 Edit - Here you can edit or delete an existing rule.
 Add New - Click the Add New button to add a new rule entry.
 Enable Selected - Click the Enable Selected button to enable selected rules in the list.
 Disable Selected - Click the Disable Selected button to disable selected rules in the list.