user manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the router
- 4.1 Login
- 4.2 Status
- 4.3 Quick Setup
- 4.4 Network
- 4.5 Dual Band Selection
- 4.6 Wireless 2.4GHz
- 4.7 Wireless 5GHz
- 4.8 Guest Network
- 4.9 DHCP
- 4.10 USB Settings
- 4.11 NAT
- 4.12 Forwarding
- 4.13 Security
- 4.14 Parent Control
- 4.15 Access Control
- 4.16 Advanced Routing
- 4.17 Bandwidth Control
- 4.18 IP & MAC Binding
- 4.19 Dynamic DNS
- 4.20 IPv6
- 4.21 System Tools
- 4.22 Logout
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C2 AC750 Wireless Dual Band Gigabit Router
- 35 -
Figure 4-12 Dual Band Selection
2.4GHz (802.11b/g/n) - Click the box, and then the router will only work in 2.4GHz frequency.
You can use the 2.4GHz band to connect to many classic wireless devices like gaming
consoles, laptops, DVRs, ect.
5GHz (802.11a/n/ac) - Click the box, and then the router will only work in 5GHz frequency.
This band is less crowded and is used for time-sensitive music, video streaming or gaming.
Using this band can avoid interference with 2.4GHz networks or noisy devices like cordless
phones and microwave ovens.
4.6 Wireless 2.4GHz
Figure 4-13 Wireless menu
There are six submenus under the Wireless menu (shown in Figure 4-13): Basic Settings, WPS,
W
ireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click
any of them, and you will be able to configure the corresponding functions.
4.6.1 Basic Settings
Choose menu “Wireless 2.4GHz → Basic Settings”, you can configure the basic settings for
the wireless network of 2.4GHz on this page.