Data Sheet

www.tp-link.com
Page 8
Features:
specifications:
Standards and Protocols
Basic Function
Ports
WDM
Network Media
LED Indicators
Safety & Emission
Dimensions (W*D*H)
Environment
Power Supply
IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Half/Full-Duplex transfer mode for FX port
Full Duplex Flow Control (IEEE 802.3x)3
Half Duplex Flow Control (Backpressure)
Extends ber distance up to 20km
Link Fault Passthrough and Far End Fault minimize the losses caused by link failure timely
1 100M SC port
1 100M RJ45 port (Auto MDI/MDIX)
TX: 1550nm
RX: 1310nm
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-T: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-FX: Single-mode Fiber
PWR, FDX/Col, LINK/Act, SPD
FCC, CE
3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
External Power Adapter, 9V/0.6A
The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice
versa. It’s designed for use with single-mode fiber cable utilizing the SC-Type connector. Adopting WDM tech-
nology, MC111CS takes only one fiber to transmit and receive data, which saves you half of the cabling cost. On
this fiber, it works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device
cooperating with the MC111CS will work at 1310nm on transferring data and at 1550nm on receiving data.
Another of TP-LINK’s media converters, the MC112CS is just one example of potential devices with which to
cooperate with the MC111CS.Moreover, MC111CS can work as a stand alone device (no chassis required) or
with TP-LINK’s 19’’ system chassis, and is equipped with Link Fault Pass-through which minimizes losses caused
by link failure.
Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port
Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
Link Fault Passthrough and Far End Fault minimize the losses caused by link failure timely Adopts WDM
technology, transmitting and receiving data on one single fiber
Extend fiber distance up to 20-60km
Easy-to-view LED indicators provide status to monitor network activity easily
MC111CS