Data Sheet

www.tp-link.com
Page 6
Features:
specifications:
Standards and Protocols
Basic Function
Ports
Network Media
LED Indicators
Safety & Emission
Dimensions (W*D*H)
Environment
Power Supply
IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Half/Full-Duplex transfer mode for FX port
Full Duplex Flow Control (IEEE 802.3x)3
Half Duplex Flow Control (Backpressure)
Extends ber distance up to 2km
Link Fault Passthrough and Far End Fault minimize the losses caused by link failure timely
1 100M SC port
1 100M RJ45 port (Auto MDI/MDIX)
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-T: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-FX: Multi-mode Fiber
PWR, FDX/Col, LINK/Act, SPD
FCC, CE
3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
External Power Adapter, 9V/0.6A
The MC100CM media converter converts 100BASE-FX fiber to 100Base-TX copper media or vice versa. It is
designed for use with 1310nm multi-mode fiber cable utilizing the SC-Type connector, transmitting data up to
2 kilometers. What's more, MC100CM can work as a stand alone device (no chassis required)or with TP-LINK’s
19’’ system chassis, and is equipped with Link Fault Pass-through which minimizes losses caused by link failure.
Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port
Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
Extend fiber distance up to 2km
Easy-to-view LED indicators provide status to monitor network activity easily
MC100CM