Data Sheet

www.tp-link.com
Page 4
Features:
specifications:
Standards and Protocols
Basic Function
Output Center Wavelength
Ports
Network Media
LED Indicators
Safety & Emission
Dimensions (W*D*H)
Environment
Power Supply
IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Full Duplex Flow Control (IEEE 802.3x)
Extends ber distance up to 15km
Link Fault Passthrough and Far End Fault minimize the losses caused by link failure timely
1310nm
1 1000M SC port
1 1000M RJ45 port (Auto MDI/MDIX)
1000BASE-T: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
1000BASE-FX: Multi-mode Fiber
PWR, LINK, RX
FCC, CE
3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
External Power Adapter, 9V/0.6A
The MC210CS media converter converts 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. It is
designed for use with 1310nm single-mode fiber cable utilizing the SC-Type connector, transmitting data up
to 15 kilometers. What's more, MC210CS can work as a stand alone device (no chassis required) or with
TP-LINK’s 19’ system chassis.
Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
Supports auto MID/MID-X for TX port
Provides switch configuration of Force /Auto transfer mode for FX port
Link Fault Passthrough and Far End Fault minimize the losses caused by link failure timely
Extends fiber distance up to 15km
Easy-to-view LED indicators provide status to monitor network activity easily
MC210CS