Whole Home Mesh Wi-Fi System Seamless Roaming | Parental Controls | Easy Setup User Guide AC1200 Whole Home Mesh Wi-Fi System 1910013031 REV3.0.
Contents About This Guide····················································· 1 Blacklist·······································································19 Set Up Your Deco···················································· 3 WPS···············································································21 Appearance································································ 2 Add More Decos······················································ 7 Dashboard······························
About This Guide This guide provides a brief introduction to Deco Whole Home Mesh Wi-Fi System and the Deco app, as well as regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience.
Appearance Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation below: Tip: The product label can be found at the bottom of the product. Yellow pulse: Deco is resetting. Yellow solid: Deco is starting up. Blue pulse: Deco is ready for setup. Blue solid: Deco is setting up. White pulse: Deco is upgrading firmware. White solid: Deco is registered and all is well. Red pulse: Deco is disconnected from main Deco.
Set Up Your Deco The intuitive Deco app guides you through an easy setup process that gets each unit up and running and all your devices connected and online. Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi System. 1. Download and install the Deco app Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet. 2. Log in with TP-Link ID Open the app. Use your TP-Link ID to log in.
4. Plug in and power on Deco Power off your modem. Connect your Deco to the modem and power them both on. If you don't have a modem, connect the Ethernet outlet directly to your Deco. 5. Connect to the Deco's Wi-Fi Wait until the Wi-Fi Signal LED pulses blue, then connect to the Deco's Wi-Fi using the default SSID printed on the product label. 6. Select a location Select a location for this Deco. If its location is not listed, you can create a new one by choosing Custom.
. Set up internet connection Select the internet connection type and enter the information. If you are not sure, contact your internet service provider. 8. Create your Wi-Fi network Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi. 9. Connect to your Wi-Fi network Connect your phone/tablet to the Deco's new Wi-Fi.
10. Setup complete Your Deco network is now up. Connect all devices to the Deco network. You can also add more Deco units to expand the Wi-Fi coverage.
Add More Decos After created a Deco network, you can add more Deco units to the network to expand the Wi-Fi coverage and manage them easily on your Deco app. In Overview, tap . Select the Deco model you want to add, and follow app instructions to complete the setup. After the setup, you can find the added Deco units by tapping Overview.
Dashboard After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can get an overview of the network status, check the connected clients, and configure more advanced features.
