User's Guide

5
Set Up Your Smart Power Outlet
Follow the steps below to set up your Smart Power Outlet via Kasa Smart app.
4. Label the Old Wires
Turn off the power, remove the old wallplate
and label the wires before the disconnection.
Label the Wires
100%9:41 AMSketch
Use the provided labels to label the wires.
The black wire is line wire. The white wire
is neutral wire.
Next
5. Connect the New Wires
Disconnect the old wires and connect the new
wires to the connections of Smart Outlet with
the wire labels.
Note: Straighten and align the ends of wires from Smart Outlet and your
outlet box. Fully tighten them and ensure that no conductor is exposed.
Connect the Wires
100%9:41 AMSketch
Use the wire labels to help you match
wires to the connections of Smart Outlet.
Next
6. Double-Check the Wires
Check all of the wires and give them a light tug
while holding the wire nut to make sure they
are secure.
Double-Check the Wires
100%9:41 AMSketch
Check that all of the wires are correct.
Give them a light tug while holding the
wire nut to make sure they are secure.
Next