Specifications

84
7.5.2 Protocol Group
On this page, you can configure the Protocol Group.
Choose the menu VLAN→Protocol VLAN→Protocol Group to load the following page.
Figure 7-10 Enable Protocol VLAN for Port

Protocol Group Config
Protocol Name:
Select the defined protocol template.
VLAN ID:
Enter the ID number o
f the Protocol VLAN. This VLAN should be one
of the 802.1Q VLANs the ingress port belongs to.

Protocol Group Member
UN I T:
Select the unit ID of the desired member in the stack.
7.5.3 Protocol Template
The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.