Specifications

45
Choose the menu Stack Management→Switch Renumber to load the following page.
Figure 5-9 Switch Renumber
The following entries are displayed on this screen:

Switch Renumber
Select: Select the desired entry. It is multi-optional.
Current Unit: Displays the current unit number of the member switch.
Designated Unit: Configure the unit number of the member switch.
•
Auto: With this option selected, the member switch will be
assigned a free unit number automatically.
• 0-7: With this option select
ed, the member switch will be
assigned this unit number if it has not been used by the other
members, otherwise the member switch will be assigned a free
unit number automatically.
Only the unused unit number is
available for you to choose from.
Role: The role of the device in a stack.
MAC Address
：
Displays the MAC address of the member switch.
5.2 Application Example for Stack
 Network Requirements
Establish a stack of ring topology with four T2700-28TQ switches.
 Network Diagram