Specifications

364
The following entries are displayed on this screen:

Global Config
NTDP:
Displays the NTDP status (enabled or disabled) of the switch
globally.
NTDP Interval Time: Displays the interval to collect topology information.
NTDP Hops: Displays the hop count the switch topology collects.
NTDP Hop Delay:
Displays the time between the switch receiving NTDP request
packets and the switch forwarding NTDP request packets for the
first time.
NTDP Port Delay: Displays the time between t
he port forwarding NTDP request
packets and its adjacent port forwarding NTDP request packets
over.

Port Status
UN I T: Select the unit ID of the desired member in the stack.
Selected Port(s): Selected Port means NTDP function of the port is enabled.
Unselected Port(s): Unselected Port means NTDP function of the port is disabled.
17.2.3 NTDP Config
On this page you can configure NTDP globally.
Choose the menu Cluster→NTDP→NTDP Config to load the following page.
Figure17-8 NTDP Config
The following entries are displayed on this screen:

Global Config
NTDP: Select Enable/Disable NTDP for the switch globally.