Specifications

25
Note:
1. Don’t interrupt the upgrade.
2. Please select the proper software version matching with your hardware to upgrade.
3. To avoid damage, please don't turn off the device while upgrading.
4. After upgrading, the device will reboot automatically.
5. You are suggested to backup the configuration before upgrading.
4.3.5 License Load
On this page you can load a license file to upgrade the switch and activate the layer 3 routing
capabilities.
To obtain the T2700G-28TQ Layer 3 License T2700G-28TQ-L1000:
1. Buy a license key from a TP-LINK authorized distributor.
2. Go to T2700G-28TQ page at TP-LINK website, use the license key together with the switch
S/N and MAC address for authentication and download the license T2700G-28TQ-L1000.
Choose the menu System→System Tools→License Load to load the following page.
Figure 4-14 License Download
After the license file is loaded, the device will reboot automatically.
Note:
User can delete the license file in the bootUtil menu. For details about the bootUtil, please refer to
Chapter 19 System Maintence via FTP.
4.3.6 System Reboot
On this page you can reboot the specified unit switch in the stack and return to the login page.
Please save the current configuration before rebooting to avoid losing the configuration unsaved
Choose the menu System→System Tools→System Reboot to load the following page.
Figure 4-15 System Reboot