Specifications

263
The following entries are displayed on this screen:

Static Mroute Config
Source: Enter the IP a
ddress that identifies the multicast source of the
entry you are creating.
Source Mask: Enter the subnet mask to be applied to the Source.
RPF Neighbor: Enter the IP address of the neighbor ro
uter on the path to the
mroute source.
Distance:
Enter the Administrative distance of static mroute. The range
is 0-
255 and default is 0. The lower the distance, the better the
preference.

Static Mroute Config Table
Select
：
Select the static mroute entry to modify.
Source: Displays the IP address of the multicast source.
Source Mask: Displays the subnet mask of source.
RPF Neighbor: Displays the IP address of the neighbor router.
Distance: Displays the Administrative distance of static mroute.
Click modify to modify the selected entry. Click delete to delete the selected entry.
11.5.2 Static Mroute Table
Choose the menu Multicast Routing→Static Mroute→Static Mroute Table to load the following
page. This table displays the static mroute entries whose RPF neighbor addresses are valid.
Figure 11-28 Static Mroute Table

Static Mroute Config
Source: Displays the IP address of the multicast source.
Source Mask: Displays the subnet mask of source.
RPF Neighbor: Displays the IP address of the neighbor router.
Distance: Displays the Administrative distance of static mroute.
11.5.3 Application Example for Static Mroute
 Network Requirements
1. The network runs PIM DM and all the switches in the network support multicast features.
2. Switch A, Switch B and Switch C run OSPF protocol.